Influence of Temperature and Frequency on Electric Field Reduction Method via a Nonlinear Field Dependent Conductivity Layer Combined with Protruding Substrate for Power Electronics Modules

Maryam Mesgarpour Tousi; Mona Ghassemi

Home/Archive/arXiv

arXiv · 2006.14657

Influence of Temperature and Frequency on Electric Field Reduction Method via a Nonlinear Field Dependent Conductivity Layer Combined with Protruding Substrate for Power Electronics Modules

Maryam Mesgarpour Tousi·Mona Ghassemi

View original source ↗Read source document ↗Export metadata ↓

Abstract

As shown in our previous studies, geometrical field grading techniques such as stacked and protruding substrate designs cannot well mitigate high electric stress issue within power electronics modules. However, it was shown that a combination of protruding substrate design and applying a nonlinear field-dependent conductivity layer could address the issue. Electric field (E) simulations were carried out according to IEC 61287-1 for the partial discharge test measurement step, where a 50/60 Hz AC voltage was applied. However, dielectrics, including ceramic substrate and silicone gel, in power devices undergo high temperatures up to a few hundred degrees and frequencies up to 1 MHz. Thus, E values obtained with electrical parameters of the mentioned dielectrics for room temperature and under 50/60 Hz may not be valid for high temperatures and frequencies mentioned above. In this paper, we address this technical gap through developing a finite element method (FEM) E calculation model developed in COMSOL Multiphysics where E calculations are carried out for different temperatures up to 250 C and frequencies up to 1 MHz. Using the model, the influence of temperature and frequency on our proposed electric field mitigation technique mentioned above is evaluated.

Explore related subjects

physics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Maryam Mesgarpour Tousi, Mona Ghassemi. 2020-06-25. Influence of Temperature and Frequency on Electric Field Reduction Method via a Nonlinear Field Dependent Conductivity Layer Combined with Protruding Substrate for Power Electronics Modules. https://arxiv.org/abs/2006.14657

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Pendellösung length-scale neutron and X-ray interferometry

Neutron and X-ray perfect-crystal interferometers (PCIs) are powerful platforms for studies of fundamental physics and phase-contrast imaging. Further enhancing several PCI capabilities requires reducing crystal blade thickness to the micron scale, which minimizes dynamical-diffraction image blur, permits operation in the pendellösung regime where blade thickness controls beam splitting, and reduces absorption for simultaneous neutron and X-ray operation. However, fabricating multiple crystal blades with identical micrometer-scale thicknesses over centimeter-scale areas remains a major challenge. Here, using a non-etching sub-micron fabrication technique, we demonstrate silicon triple-Laue interferometers with equal-blade-thicknesses of 110 $μ$m and 350 $μ$m, operated with both neutrons and X-rays. These devices are the thinnest PCIs realized to date, enabling a factor-of-six reduction in dynamical-diffraction beam spreading for improved phase-contrast imaging, while reaching the single pendellösung length regime in which crystal thickness provides an experimentally accessible control parameter for engineered quantum-optical beam splitting of plane-wave inputs. These results motivate multi-blade PCI designs utilizing identical half-pendellösung crystal lamellae that are proposed for neutron spin--orbit and electric dipole moment measurements.

physics.app-ph↗

arXiv2026

A State-Space Framework for trivial and Topological Metamaterial Stochastic Analysis

Topological phononic crystals and elastic metamaterials support edge states defined by global topological invariants, offering a route toward vibration-control and wave-guiding devices that remain functional in the presence of defects. However, manufacturing-induced spatial variability can perturb these invariants and compromise their robustness, making its quantification essential during design. In this work, we first demonstrate that a previously proposed linear time-varying (LTV) formulation is mathematically equivalent to the spectral element method based on transfer matrices for elementary rod, Saint-Venant shaft, and Euler-Bernoulli beam theories. The deterministic formulation is then extended to stochastic analyses through a stochastic linear time-varying (SLTV) framework. The proposed methodology combines Monte Carlo simulations with stochastic Fourier series and an analytical Karhunen--Loève expansion, providing closed-form stochastic fields and their derivatives required by the LTV formulation. The SLTV approach enables the computation of stochastic dispersion diagrams and forced responses of one-dimensional waveguides with arbitrarily varying geometry and mechanical properties. Because the LTV-based transition matrix isolates individual wavemodes without requiring the mode tracking needed by conventional eigenproblem-based formulations, the framework is particularly suited for evaluating topological invariants, specifically the Zak phase, and assessing the robustness of topological bands under spatial variability. Numerical results for rods, shafts, and Euler-Bernoulli beams demonstrate the applicability of the proposed framework as a unified methodology for deterministic and stochastic analyses of trivial and topological periodic waveguides under continuous spatial uncertainty.

physics.app-ph↗

arXiv2026

Low-loss phononic integrated circuits based on a silicon nitride-lithium niobate platform

Microwave-frequency acoustic waves in solids have emerged as a versatile platform for both classical and quantum applications. While phononic integrated devices and circuits are being developed on various material platforms, an ideal phononic integrated circuit (PnIC) platform should simultaneously support low-loss waveguide structures, high-quality-factor resonators, high-performance modulators, and efficient electromechanical transducers. Here, we establish a low-loss gigahertz-frequency PnIC platform based on patterned thin-film silicon nitride (SiN) on lithium niobate (LN) substrate. We develop low-loss PnIC building blocks including waveguides, directional couplers, and high-quality-factor (high-Q) ring resonators. As an application, we demonstrate a 1-GHz phononic oscillator based on a ring resonator, reaching a low phase noise of -159.0 dBc/Hz at a 100-kHz offset frequency. Our low-loss PnICs could meet the requirements in microwave acoustics, quantum phononics, and integrated hybrid systems combining phonons, photons, superconducting qubits, and solid-state defects.

physics.app-ph↗