Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2008.01866

RNA Detection in air by means of Cosmic Rays interactions

Adlish John I.·Enrico Mainardi·Piero Neuhold·Riccardo Surrente·Luca J Tagliapietra
View original source ↗Read source document ↗Export metadata ↓

Abstract

The study research presented hereafter shows a new methodology to reveal traces of Viral particles thanks to their own chemical structure such as P31, an element making up part of the structure of RNA, a type of nucleic acid, such as in a virus, in an open space or a closed ambient ( typically an airport hall) detecting sub-atomic particles interactions with the air due to Cosmic Rays , an Outer Space free source .This is constructed with the use of adequate detectors (under development) looking in particular at the peculiar interactions of muons, cosmic rays relativistic particle segment, with the no living matter present as aerosol in the air.

Explore related subjects

physics.ins-detphysics.med-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Adlish John I., Enrico Mainardi, Piero Neuhold, Riccardo Surrente, Luca J Tagliapietra. 2020-10-03. RNA Detection in air by means of Cosmic Rays interactions. https://doi.org/10.1142/s2424942420500036

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Radiation hardness characterization of SiPM sensors for Low Earth Orbit space missions

This work presents a comprehensive radiation hardness characterization of SiPM devices for space-based applications: FBK NUV-HD-MT and NUV-HD-LowCT (1$\times$1, 3$\times$3, and 6$\times$6~mm$^2$) and Hamamatsu S14160 MPPCs with equivalent active areas. Total Ionizing Dose (TID) tests were performed at the ESA/ESTEC Co-60 facility with a level of dose up to 20~krad in silicon, while displacement damage effects were evaluated using 100~MeV protons with a fluence up to $1.12\times10^{11}$~p/cm$^2$ at the Paul Scherrer Institute. Radiation damage in SiPMs manifests through two main mechanisms: ionizing energy loss and non-ionizing energy loss (NIEL), which increases dark current and dark count rate. In this work, breakdown voltage, dark current, and quenching resistance were systematically measured as functions of accumulated dose and fluence. Gain and dark count rates were indirectly measured from the characterized electrical parameters. Both technologies exhibit remarkable stability of most of the functional parameters across all dose levels, while dark current shows predictable increases significantly more pronounced under proton irradiation due to displacement damage. Based on these results, both FBK and Hamamatsu devices are confirmed suitable for Low Earth Orbit (LEO) mission environment.

physics.ins-det↗
arXiv2026

Characterization of immersed SiPM arrays in liquid scintillator between room temperature and $-30\,^{\circ}\mathrm{C}$

Liquid scintillator detectors instrumented with distributed silicon photomultiplier (SiPM) arrays can be used in compact, topology-sensitive, and low-background experiments, but the temperature dependence of SiPMs immersed directly in the scintillation medium has not been widely characterized. We report the operation of a 125-liter linear-alkylbenzene-based liquid scintillator detector read out by 125 SiPM channels immersed in the active volume, over the range from room temperature to $-30\,^{\circ}\mathrm{C}$. The detector response was measured with cosmic-ray muons, including stopping muons followed by their Michel-electron decay. Cooling from $+15\,^{\circ}\mathrm{C}$ to $-30\,^{\circ}\mathrm{C}$ reduced the SiPM dark-count rate by a factor of 13.5, increased the single-photoelectron response by 49.1%, and increased the cosmic-ray muon light yield by 16.7%. The improved photoelectron separation and baseline stability at low temperature enabled a selection of stopping-muon events, from which the effective muon lifetime was measured to be $1959\pm132\,\mathrm{ns}$, consistent with the value expected for a hydrocarbon scintillator once $μ^{-}$ capture on carbon is taken into account.

physics.ins-det↗
arXiv2026

kicad-pycbnew: A Python Framework for Automated, High-Precision PCB Design in Particle Detector Instrumentation

kicad-pycbnew is an open-source Python library for the automated, script-based generation of KiCad PCB designs, tailored to the precise geometric and impedance constraints of particle detector readout electronics. By enabling the programmatic definition of copper traces, zones, vias, and footprints --- without a graphical interface --- it addresses the challenges of designing large-scale, repetitive, or parameterized layouts (e.g., Resistive Plate Chamber (RPC) strips or controlled-impedance signal paths). Key features include constraint-driven routing, parallel track arrays with rounded corners, via grids with exclusion zones, and full compatibility with KiCad's native file format. Standalone operation (no KiCad runtime required) facilitates integration into CI/CD pipelines and ensures reproducibility. The library, released under the MIT License, includes validated examples such as trapezoidal RPC readout boards and extension boards for the COMET experiment, alongside comprehensive tests and documentation.

physics.ins-det↗