Search arXivSearch

arXiv · 2008.03446

Using Gaia DR2 to solve differential color refraction and charge transfer efficiency issues

Abstract

The Gaia DR2 catalog released in 2018 gives information about more than one billion stars, including their extremely precise positions that are not affected by the atmosphere, as well as the magnitudes in the G, RP, and BP passbands. This information provides great potential for the improvement of the ground-based astrometry. Based on Gaia DR2, we present a convenient method to calibrate the differential color refraction (DCR). This method only requires observations with dozens of stars taken through a selected filter. Applying this method to the reduction of observations captured through different filters by the 1-m and 2.4-m telescopes at Yunnan Observatory, the results show that the mean of the residuals between observed and computed positions (O-C) after DCR correction is significantly reduced. For our observations taken through an N (null) filter, the median of the mean (O-C) for well-exposed stars (about 15 G-mag) decreases from 19 mas to 3 mas, thus achieving better accuracy, i.e. mean (O-C). Another issue correlated is a systematic error caused by the poor charge transfer efficiency (CTE) when a CCD frame is read out. This systematic error is significant for some of the observations captured by the 1-m telescope at Yunnan Observatory. Using a sigmoidal function to fit and correct the mean (O-C), a systematic error up to 30 mas can be eliminated.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

F. R. Lin, Q. Y. Peng, Z. J. Zheng. 2020-08-08. Using Gaia DR2 to solve differential color refraction and charge transfer efficiency issues. https://doi.org/10.1093/mnras%2Fstaa2439

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM