A comparative study of the behaviour of forsterite melts under atmospheric and sub-atmospheric conditions

Biswajit Mishra; Prateek Manvar; Kaushik Choudhury; S. Karagadde; Atul Srivastava

Home/Archive/arXiv

arXiv · 2008.07422

A comparative study of the behaviour of forsterite melts under atmospheric and sub-atmospheric conditions

Biswajit Mishra·Prateek Manvar·Kaushik Choudhury·S. Karagadde·Atul Srivastava

View original source ↗Read source document ↗Export metadata ↓

Abstract

The study is focussed towards understanding the difference in behaviour of forsterite droplets subjected to sub-atmospheric conditions. Melt droplets, 1.5-2.5 mm in diameter, are made to crystallize under levitated conditions. The spherule is initially superheated by about 250oC above its liquids temperature, for both atmospheric and sub-atmospheric conditions, and then, subsequently cooled at different cooling rates. Crystallization of molten droplets was observed from their hypercooled states in all the cases. It was found that the level of undercooling was more (~150K-200K) for sub-atmospheric cases. In addition, the degree of recalescence was also found to be higher. However, the varying cooling rates did not produce any considerable effect on the level of undercooling or, even, the degree of recalescence. For better insight into the dynamics of crystallization, in situ visualization of the recalescence process was made possible by use of high-speed camera. A clear difference in the growth mechanisms was observed. The role of cooling rate in affecting crystallization was seen as the difference in the growth of the crystal-front; from a clear rim front, in high cooling rates, to a faded irregularly shaped crystal front, in low cooling rates. Two proper crystal fronts were observed in all the cases, which correspond to surface and volumetric crystallizations. It was observed that the molten droplets, under sub-atmospheric conditions, undergo high rate of volumetric crystallization, which is marked by the sightings of surface textures during the recalescence process. High-speed camera images of recalescence provided direct observational proof of the delay in volumetric crystallization, compared to surface crystallization.

Explore related subjects

physics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Biswajit Mishra, Prateek Manvar, Kaushik Choudhury, S. Karagadde, Atul Srivastava. 2020-08-17. A comparative study of the behaviour of forsterite melts under atmospheric and sub-atmospheric conditions. https://arxiv.org/abs/2008.07422

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Pendellösung length-scale neutron and X-ray interferometry

Neutron and X-ray perfect-crystal interferometers (PCIs) are powerful platforms for studies of fundamental physics and phase-contrast imaging. Further enhancing several PCI capabilities requires reducing crystal blade thickness to the micron scale, which minimizes dynamical-diffraction image blur, permits operation in the pendellösung regime where blade thickness controls beam splitting, and reduces absorption for simultaneous neutron and X-ray operation. However, fabricating multiple crystal blades with identical micrometer-scale thicknesses over centimeter-scale areas remains a major challenge. Here, using a non-etching sub-micron fabrication technique, we demonstrate silicon triple-Laue interferometers with equal-blade-thicknesses of 110 $μ$m and 350 $μ$m, operated with both neutrons and X-rays. These devices are the thinnest PCIs realized to date, enabling a factor-of-six reduction in dynamical-diffraction beam spreading for improved phase-contrast imaging, while reaching the single pendellösung length regime in which crystal thickness provides an experimentally accessible control parameter for engineered quantum-optical beam splitting of plane-wave inputs. These results motivate multi-blade PCI designs utilizing identical half-pendellösung crystal lamellae that are proposed for neutron spin--orbit and electric dipole moment measurements.

physics.app-ph↗

arXiv2026

A State-Space Framework for trivial and Topological Metamaterial Stochastic Analysis

Topological phononic crystals and elastic metamaterials support edge states defined by global topological invariants, offering a route toward vibration-control and wave-guiding devices that remain functional in the presence of defects. However, manufacturing-induced spatial variability can perturb these invariants and compromise their robustness, making its quantification essential during design. In this work, we first demonstrate that a previously proposed linear time-varying (LTV) formulation is mathematically equivalent to the spectral element method based on transfer matrices for elementary rod, Saint-Venant shaft, and Euler-Bernoulli beam theories. The deterministic formulation is then extended to stochastic analyses through a stochastic linear time-varying (SLTV) framework. The proposed methodology combines Monte Carlo simulations with stochastic Fourier series and an analytical Karhunen--Loève expansion, providing closed-form stochastic fields and their derivatives required by the LTV formulation. The SLTV approach enables the computation of stochastic dispersion diagrams and forced responses of one-dimensional waveguides with arbitrarily varying geometry and mechanical properties. Because the LTV-based transition matrix isolates individual wavemodes without requiring the mode tracking needed by conventional eigenproblem-based formulations, the framework is particularly suited for evaluating topological invariants, specifically the Zak phase, and assessing the robustness of topological bands under spatial variability. Numerical results for rods, shafts, and Euler-Bernoulli beams demonstrate the applicability of the proposed framework as a unified methodology for deterministic and stochastic analyses of trivial and topological periodic waveguides under continuous spatial uncertainty.

physics.app-ph↗

arXiv2026

Low-loss phononic integrated circuits based on a silicon nitride-lithium niobate platform

Microwave-frequency acoustic waves in solids have emerged as a versatile platform for both classical and quantum applications. While phononic integrated devices and circuits are being developed on various material platforms, an ideal phononic integrated circuit (PnIC) platform should simultaneously support low-loss waveguide structures, high-quality-factor resonators, high-performance modulators, and efficient electromechanical transducers. Here, we establish a low-loss gigahertz-frequency PnIC platform based on patterned thin-film silicon nitride (SiN) on lithium niobate (LN) substrate. We develop low-loss PnIC building blocks including waveguides, directional couplers, and high-quality-factor (high-Q) ring resonators. As an application, we demonstrate a 1-GHz phononic oscillator based on a ring resonator, reaching a low phase noise of -159.0 dBc/Hz at a 100-kHz offset frequency. Our low-loss PnICs could meet the requirements in microwave acoustics, quantum phononics, and integrated hybrid systems combining phonons, photons, superconducting qubits, and solid-state defects.

physics.app-ph↗