Search arXivSearch

arXiv · 2008.10414

Carbon $^{14}$C and Tritium as possible background sources in XENON1T

Abstract

In this work, carbon $^{14}$C and Tritium were considered as possible background source in the XENON1T experiment. The simulation results show that if $^{14}$C is located in dust particles with a characteristic size of tens of micrometers, then its beta spectrum is softened and can contribute to the low-background part of the spectrum (up to 20 keV) of the XENON1T experiment. In addition, it has been shown that the tritium spectrum is also significantly distorted due to the threshold effect and the form in which tritium is living in xenon. Comparison of the simulation results with experimental data allowed us to estimate the activity level of $^{14}$C at about 1500 decays / t / year, which gives the level of organic impurities containing $^{14}$C at the level of 2x10$^{-13}$ g/g. In the case of tritium background, spectrum distortions are already caused by nanoparticles. Wherein the shape of the spectrum from tritium sitting on the surface of the dust fits better into the experimental data than the spectrum from pure tritium. In addition, since the dust absorbs part of the decays, the total amount of tritium in xenon can be several times greater than assuming a background from pure tritium in xenon (the factor strongly depends on the size of the dust particles).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yu. Shitov, E. Yakushev. 2020-10-01. Carbon $^{14}$C and Tritium as possible background sources in XENON1T. https://doi.org/10.1088/1748-0221%2F15%2F12%2Fp12013

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det