Search arXivSearch

arXiv · 2009.03197

The ABC130 barrel module prototyping programme for the ATLAS strip tracker

Luise Poley·Craig Sawyer·Sagar Addepalli·Anthony Affolder·Bruno Allongue·Phil Allport·Eric Anderssen·Francis Anghinolfi·Jean-François Arguin·Jan-Hendrik Arling·Olivier Arnaez·Nedaa Alexandra Asbah·Joe Ashby·Eleni Myrto Asimakopoulou·Naim Bora Atlay·Ludwig Bartsch·Matthew J. Basso·James Beacham·Scott L. Beaupré·Graham Beck·Carl Beichert·Laura Bergsten·Jose Bernabeu·Prajita Bhattarai·Ingo Bloch·Andrew Blue·Michal Bochenek·James Botte·Liam Boynton·Richard Brenner·Ben Brueers·Emma Buchanan·Brendon Bullard·Francesca Capocasa·Isabel Carr·Sonia Carra·Chen Wen Chao·Jiayi Chen·Liejian Chen·Yebo Chen·Xin Chen·Vladimir Cindro·Alessandra Ciocio·Jose V. Civera·Kyle Cormier·Ella Cornell·Ben Crick·Wladyslaw Dabrowski·Mogens Dam·Claire David·Gabriel Demontigny·Karola Dette·Joel DeWitt·Sergio Diez·Fred Doherty·Jens Dopke·Nandor Dressnandt·Sam Edwards·Vitaliy Fadeyev·Sinead Farrington·William Fawcett·Javier Fernandez-Tejero·Emily Filmer·Celeste Fleta·Bruce Gallop·Zachary Galloway·Carlos Garcia Argos·Diksha Garg·Matthew Gignac·Dag Gillberg·Dena Giovinazzo·James Glover·Peter Goettlicher·Laura Gonella·Andrej Gorišek·Charles Grant·Fiona Grant·Calum Gray·Ashley Greenall·Ingrid-Maria Gregor·Graham Greig·Alexander A. Grillo·Shan Gu·Francesco Guescini·Joao Barreiro Guimaraes da Costa·Jane Gunnell·Ruchi Gupta·Carl Haber·Amogh Halgeri·Derek Hamersly·Tom-Erik Haugen·Marc Hauser·Sarah Heim·Timon Heim·Cole Helling·Hannah Herde·Nigel P. Hessey·Bart Hommels·Jan Cedric Hönig·Amelia Hunter

Abstract

For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.

Explore related subjects

Keep this discovery

BibTeXRIS

Luise Poley, Craig Sawyer, Sagar Addepalli, Anthony Affolder, Bruno Allongue, Phil Allport, Eric Anderssen, Francis Anghinolfi, Jean-François Arguin, Jan-Hendrik Arling, Olivier Arnaez, Nedaa Alexandra Asbah, Joe Ashby, Eleni Myrto Asimakopoulou, Naim Bora Atlay, Ludwig Bartsch, Matthew J. Basso, James Beacham, Scott L. Beaupré, Graham Beck, Carl Beichert, Laura Bergsten, Jose Bernabeu, Prajita Bhattarai, Ingo Bloch, Andrew Blue, Michal Bochenek, James Botte, Liam Boynton, Richard Brenner, Ben Brueers, Emma Buchanan, Brendon Bullard, Francesca Capocasa, Isabel Carr, Sonia Carra, Chen Wen Chao, Jiayi Chen, Liejian Chen, Yebo Chen, Xin Chen, Vladimir Cindro, Alessandra Ciocio, Jose V. Civera, Kyle Cormier, Ella Cornell, Ben Crick, Wladyslaw Dabrowski, Mogens Dam, Claire David, Gabriel Demontigny, Karola Dette, Joel DeWitt, Sergio Diez, Fred Doherty, Jens Dopke, Nandor Dressnandt, Sam Edwards, Vitaliy Fadeyev, Sinead Farrington, William Fawcett, Javier Fernandez-Tejero, Emily Filmer, Celeste Fleta, Bruce Gallop, Zachary Galloway, Carlos Garcia Argos, Diksha Garg, Matthew Gignac, Dag Gillberg, Dena Giovinazzo, James Glover, Peter Goettlicher, Laura Gonella, Andrej Gorišek, Charles Grant, Fiona Grant, Calum Gray, Ashley Greenall, Ingrid-Maria Gregor, Graham Greig, Alexander A. Grillo, Shan Gu, Francesco Guescini, Joao Barreiro Guimaraes da Costa, Jane Gunnell, Ruchi Gupta, Carl Haber, Amogh Halgeri, Derek Hamersly, Tom-Erik Haugen, Marc Hauser, Sarah Heim, Timon Heim, Cole Helling, Hannah Herde, Nigel P. Hessey, Bart Hommels, Jan Cedric Hönig, Amelia Hunter. 2020-09-07. The ABC130 barrel module prototyping programme for the ATLAS strip tracker. https://doi.org/10.1088/1748-0221/15/09/p09004

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det