Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2009.06907

FEM modelling techniques for simulation of 3D concrete printing

Gieljan Vantyghem·Ticho Ooms·Wouter De Corte
View original source ↗Read source document ↗Export metadata ↓

Abstract

Three-dimensional concrete printing (3DCP) has gained a lot of popularity in recent years. According to many, 3DCP is set to revolutionize the construction industry: yielding unparalleled aesthetics, better quality control, lower cost, and a reduction of the construction time. In this paper, two finite element method (FEM) strategies are presented for simulating such 3D concrete printing processes. The aim of these models is to predict the structural behaviour during printing, while the concrete is still fresh, and estimate the optimal print speed and maximum overhang angle to avoid print failures. Both FE analyses involve solving multiple static implicit steps where sets of finite elements are added stepwise until failure. The main difference between the two methods is in the discretization of the 3D model. The first method uses voxelization to approximate the 3D shape, while the second approach starts from defining the toolpath and constructs finite elements by sweeping them along the path. A case study is presented to evaluate the effectiveness of both strategies. Both models are in good agreement with each other, and a comparable structural response is obtained. The model's limitations and future challenges are also discussed. Ultimately, the paper demonstrates how FEM-based models can effectively simulate complex prints and could give recommendations with regards to a better print strategy. These suggestions can be related to the maximum printing speed and overhang angle, but also the optimal layer height and thickness, the specific choice of the infill pattern, or by extension the mixture design. When print failures can be avoided, this methodology could save time, resources and overall cost. Future work will focus on the validation of these numerical models and comparing them to experimental data.

Explore related subjects

physics.comp-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gieljan Vantyghem, Ticho Ooms, Wouter De Corte. 2020-09-15. FEM modelling techniques for simulation of 3D concrete printing. https://arxiv.org/abs/2009.06907

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A subcell-refined entropy-residual-driven limiting strategy for high-order discontinuous Galerkin methods

Fine-grained, subcell-level dissipation control is essential for achieving robust high-order discontinuous Galerkin (DG) simulations of nonlinear hyperbolic systems in under-resolved regimes while preserving accuracy. This paper proposes a subcell-refined entropy-residual-driven limiting strategy for DG on Legendre-Gauss-Lobatto nodes. The limiter introduces only nearest-neighbor pairwise dissipation within each element, with closed-form coefficients that supply the minimal dissipation required to restore the element entropy inequality. The strategy is a diagonal, locally stable approximation of classical entropy-stable methods, and a generalized subcell framework reveals split-form DG and residual-distribution-based entropy correction schemes as particular choices of the limiting coefficients. For the Euler equations, a physically consistent jump operator separately models thermal and shear entropy production while preserving velocity and pressure equilibrium; a subcell refinement of the Zhang-Shu positivity limiter ensures pointwise positivity. Extensive numerical tests confirm that the scheme maintains optimal high-order accuracy, strictly enforces entropy dissipation, and significantly reduces the difficulty of a posteriori positivity-preserving procedures.

physics.comp-ph↗
arXiv2026

VNS Tokamak for Medical Isotope Production

The Volumetric Neutron Source (VNS) tokamak is a proposed fusion reactor for testing components under fusion neutron irradiation, and has potential use for radioisotope production. The VNS geometry is modeled in the Serpent 2.2.2 and OpenMC 0.15.2 neutronics codes. Coupled neutron-photon simulations compared fluxes, spectra, and selected reaction rates in the blanket and vacuum vessel. Good agreement was found overall, with the largest difference found in (n, 2n) reactions. On an HPC cluster, Serpent 2 was found to have shorter computation time in coupled simulations, while OpenMC was faster in neutron only simulations. Radioisotope production yields were simulated in Serpent 2.2.2 for capsule and Cobalt plate irradiation facilities. Results indicate potential for large volume production of 99Mo, 131I, 225Ac, 177Lu, 192Ir, 64Cu, 67Cu, 161Tb, and 153Sm while 203Pb indicates lower potential. 100Mo and LEU target heating was calculated, suggesting the LEU target mass or the cooling may need adjustment. Optimized 60Co production yielded 1.2 GBq/mg and 100,000 TBq after a 3-year irradiation period. Sensitivity to plant outage for 99Mo, 131I, 177Lu, and 60Co was simulated, suggesting irradiation can be restarted for the same isotope loading and demonstrated long-lived 60Co to be robust to long plant dwell-time.

physics.comp-ph↗
arXiv2026

MadVfold: accelerating NLO event generation and reducing negative weights with SIMD vectorization and GPUs

NLO simulations are essential for LHC physics analyses but are expensive, as they are not only slow but also lead to negative weights, which imply the need to simulate much larger samples of events. Folding is a powerful technique to reduce negative weights but is itself expensive. In this paper I propose ``vectorized folding'' as a new idea to speed up these calculations using SIMD and GPUs, and I present its CUDACPP-based implementation for MG5aMC in MadVfold, including its extension for unfolded NLO event generation. Preliminary results show overall speedups around 6x to 9x with folding and 3x without it. This work is based on a test-centric, LLM-assisted software development process.

physics.comp-ph↗