Search arXivSearch

arXiv · 2009.07219

A Synthetic Macroscopic Magnetic Unipole

Abstract

We demonstrate experimentally with a prototype for the first time, that an artificial emergent magnetic unipole hedgehog field in a simply connected three dimensional domain is possible, emulating effectively the Dirac model by simply using a novel permanent magnets' topology and geometrical arrangement in a ring array. Although similar effects were demonstrated by others over the last decade, with these effects usually observed and lasting for a small fraction in time and applied at the quantum or microscopic scale using primary BECs, Skyrmions, Spin Ice and recently Chiral Magnets this was never shown until now and performed at the macro scale and by using normal magnets. The synthetic magnetic unipole ring array prototype progressively twists and steers the magnetic flux into vanishing curl field (i.e. vortex) geometry towards the center of the ring and its air cap. This mere act alone proves enough to create the desired effect and an apparent isolated magnetic unipole region is observed at the center of this magnetic ring array, as we have mapped with a three axis magnetometer and show with the quantum magnetic-optic device flux viewer, the ferrolens. This magnetic unipole is stable at room temperature. Because its macroscopic nature we were able to record for the first time the unique signal signature patterns of magnetic monopoles synthetic or natural, passing through a non-ideal ohmic solenoid shown in Fig.17 which can be used by researches to aid them in the detection of magnetic monopoles.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Emmanouil Markoulakis, John Chatzakis, Anthony Konstantaras, Emmanuel Antonidakis. 2020-09-15. A Synthetic Macroscopic Magnetic Unipole. https://doi.org/10.1088/1402-4896%2Fabaf8f

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det