Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2009.14690

Detecting single infrared photons toward optimal system detection efficiency

Peng Hu·Hao Li·Lixing You·Heqing Wang·You Xiao·Jia Huang·Xiaoyan Yang·Weijun Zhang·Zhen Wang·Xiaoming Xie
View original source ↗Read source document ↗Export metadata ↓

Abstract

Superconducting nanowire single-photon detector (SNSPD) with near-unity system efficiency is a key enabling, but still elusive technology for numerous quantum fundamental theory verifications and quantum information applications. The key challenge is to have both a near-unity photon-response probability and absorption efficiency simultaneously for the meandered nanowire with a finite filling ratio, which is more crucial for NbN than other superconducting materials (e.g., WSi) with lower transition temperatures. Here, we overcome the above challenge and produce NbN SNSPDs with a record system efficiency by replacing a single-layer nanowire with twin-layer nanowires on a dielectric mirror. The detector at 0.8 K shows a maximal system detection efficiency (SDE) of 98% at 1590 nm and a system efficiency of over 95% in the wavelength range of 1530-1630 nm. Moreover, the detector at 2.1K demonstrates a maximal SDE of 95% at 1550 nm using a compacted two-stage cryocooler. This type of detector also shows the robustness against various parameters, such as the geometrical size of the nanowire, and the spectral bandwidth, enabling a high yield of 73% (36%) with an SDE of >80% (90%) at 2.1K for 45 detectors fabricated in the same run. These SNSPDs made of twin-layer nanowires are of important practical significance for batch production.

Explore related subjects

cond-mat.supr-conquant-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Peng Hu, Hao Li, Lixing You, Heqing Wang, You Xiao, Jia Huang, Xiaoyan Yang, Weijun Zhang, Zhen Wang, Xiaoming Xie. 2020-09-30. Detecting single infrared photons toward optimal system detection efficiency. https://doi.org/10.1364/oe.410025

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Growth of superconducting boron doped diamond on 4inch silicon wafers

Superconducting boron-doped diamond (BDD) films were grown on 4-inch silicon wafers by microwave plasma chemical vapour deposition using gas-phase B/C ratios ranging from 6536 to 36421 ppm. Surface morphology, boron incorporation and superconducting properties were investigated as a function of gas-phase boron concentration. No systematic variation in apparent lateral grain size was observed across the series. Superconductivity was observed in all films except that grown at a B/C ratio of 6536 ppm within the measured temperature range down to 2 K. The superconducting transition temperature initially increased with increasing B/C ratio, reaching a maximum T$_c$ of 4.03 K at 24691 ppm, before decreasing at higher gas-phase B/C ratios. The corresponding resistive upper critical field at 2 K reached 3.091 T. Raman spectroscopy showed an increase in boron incorporation with increasing gas-phase B/C ratio up to 30303 ppm, followed by a slight decrease at 36421 ppm. Spatial measurements across the film grown at 24691 ppm showed T$_c$ values of 4.02, 4.19 and 3.33 K at the centre, intermediate and edge positions, respectively, with Raman spectroscopy showing a corresponding spatial variation in boron concentration. Comparison with previous growth on 2-inch wafers showed that substantially higher gas-phase B/C ratios were required to obtain comparable boron concentrations and superconducting properties on 4-inch wafers, indicating reduced boron incorporation efficiency during large-area growth. These results demonstrate the feasibility of producing superconducting BDD over a substantial area of a 4-inch silicon wafer while identifying boron incorporation and radial uniformity as key parameters for further wafer-scale optimisation.

cond-mat.supr-con↗
arXiv2026

Multigap superconductivity in Ising superconductors: The case of (LaSe)1.14(NbSe2)m misfit layer compounds

Strong spin-orbit coupling and broken inversion symmetry in transition metal dichalcogenides give rise to Ising superconductivity, a spin-protected pairing state first identified in monolayer NbSe$_2$ through in-plane critical fields far exceeding the Pauli limit. More recently, Ising superconductivity has been proposed as a potential route to unconventional and even topological superconductivity in bulk misfit compounds. Here, we investigate the superconducting order parameter of layered misfit compounds composed of alternating transition metal dichalcogenide and rocksalt layers, which host extremely doped, electronically decoupled NbSe$_2$ sheets within a three-dimensional crystal. Using directional scanning tunneling spectroscopy on the misfit superconductors (LaSe)$_{1.14}$(NbSe$_2$) and (LaSe)$_{1.14}$(NbSe$_2$)$_2$, we uncover a strongly anisotropic multigap superconducting state: a fragile gap on the $Γ$-centered Fermi-surface pocket coexists with a robust, intrinsic gap on the K and K$'$ pockets. These features are in quantitative agreement with momentum-resolved gaps $Δ(\mathbf{k})$ obtained from anisotropic Migdal-Eliashberg calculations. The marked fragility of the $Γ$-centered gap, combined with the strong sensitivity of the critical temperature to non-magnetic disorder, points to pairing beyond conventional $s$-wave symmetry, potentially involving a topological order parameter. These results establish NbSe$_2$-based misfit compounds as a tunable bulk platform for multigap, unconventional superconductivity, with Ising protection offering a promising route toward topological pairing.

cond-mat.supr-con↗
arXiv2026

Thermal Hall effect in elemental niobium, a two-gap superconductor

Niobium holds a pivotal place in superconductivity history: it is not only the elemental superconductor with the highest critical temperature, but also a long-standing candidate for multiband pairing whose evidence has remained controversial. A two-gap scenario was proposed as early as 1959, yet experimental proof stayed elusive. Here, through thermal Hall effect measurements, we unambiguously demonstrate a crossover in transverse thermal transport below $T_{\rm c}$, where the dominant carrier switches from hole-like to electron-like upon cooling. This crossover is a clear hallmark of two distinct superconducting condensates. Fitting our data to a two-gap Bardeen-Rickayzen-Tewordt (BRT) model yields a second energy gap of approximately 0.22 $k_{\rm B}T_{\rm c}$, only 11\% of the dominant gap. This small gap size accounts for the difficulty in resolving the two-gap structure in earlier experiments. Crucially, the temperature at which the electron-like contribution to longitudinal thermal conductivity begins to dominate coincides with the onset of the sign reversal in the thermal Hall coefficient, confirming consistency between the two methods, and providing crucial information on the assignment of the superconducting gaps to their respective hole- or electron-like Fermi surface sheets. These findings not only resolve a longstanding controversy, but also establish that multigap superconductivity is far more common than previously assumed, and demonstrate the thermal Hall effect as a powerful probe for resolving gap multiplicities in superconductors.

cond-mat.supr-con↗