Search arXivSearch

arXiv · 2010.02515

Observations with the 3.6 meter Devasthal Optical Telescope

Abstract

The 3.6 meter Indo-Belgian Devasthal optical telescope (DOT) has been used for optical and near-infrared (NIR) observations of celestial objects. The telescope has detected stars of B = 24.5+-0.2; R = 24.6+-0.12 and g = 25.2+-0.2 mag in exposure times of 1200, 4320 and 3600 seconds respectively. In one hour of exposure time, a distant galaxy of 24.3+-0.2 mag and point sources of ~ 25 mag have been detected in the SDSS i band. The NIR observations show that stars up to J = 20+-0.1; H = 18.8+-0.1 and K = 18.2+-0.1 mag can be detected in effective exposure times of 500, 550 and 1000 seconds respectively. The nbL band sources brighter than ~9.2 mag and strong (> 0.4 Jy) PAH emitting sources like Sh 2-61 can also be observed with the 3.6 meter DOT. A binary star having angular separation of 0.4 arc-sec has been resolved by the telescope. Sky images with sub-arc-sec angular resolutions are observed with the telescope at wavelengths ranging from optical to NIR for a good fraction of observing time. The on-site performance of the telescope is found to be at par with the performance of other similar telescopes located elsewhere in the world. Due to advantage of its geographical location, the 3.6 meter DOT can provide optical and NIR observations for a number of front line Galactic and extra-galactic astrophysical research problems including optical follow up of GMRT and AstroSat sources and optical transient objects.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ram Sagar, Brijesh Kumar, Saurabh Sharma. 2020-10-04. Observations with the 3.6 meter Devasthal Optical Telescope. https://doi.org/10.1007/s12036-020-09652-9

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM