Testing a Prototype 1U CubeSat on a Stratospheric Balloon Flight

Akaash Srikanth; Bharat Chandra; Binukumar G Nair; Nirmal K; Margarita Safonova; Shanti Prabha; Rekhesh Mohan; Jayant Murthy; Rajini G. K

arXiv · 2102.04847

Testing a Prototype 1U CubeSat on a Stratospheric Balloon Flight

Akaash Srikanth·Bharat Chandra·Binukumar G Nair·Nirmal K·Margarita Safonova·Shanti Prabha·Rekhesh Mohan·Jayant Murthy·Rajini G. K

View original source ↗Read source document ↗Export metadata ↓

Abstract

High-altitude balloon experiments are becoming very popular among universities and research institutes as they can be used for testing instruments eventually intended for space, and for simple astronomical observations of Solar System objects like the Moon, comets, and asteroids, difficult to observe from the ground due to atmosphere. Further, they are one of the best platforms for atmospheric studies. In this experiment, we build a simple 1U CubeSat and, by flying it on a high-altitude balloon to an altitude of about 30 km, where the total payload weighted 4.9 kg and examine how some parameters, such as magnetic field, humidity, temperature or pressure, vary as a function of altitude. We also calibrate the magnetometer to remove the hard iron and soft iron errors. Such experiments and studies through a stratospheric balloon flights can also be used to study the performance of easily available commercial sensors in extreme conditions as well. We present the results of the first flight, which helped us study the functionality of the various sensors and electronics at low temperatures reaching about -40 degrees Celsius. Further the motion of the payload has been tracked throughout this flight. This experiment took place on 8 March 2020 from the CREST campus of the Indian Institute of Astrophysics, Bangalore. Using the results from this flight, we identify and rectify the errors to obtain better results from the subsequent flights.

Explore related subjects

astro-ph.IM physics.ao-ph physics.ins-det

Keep this discovery

BibTeX RIS

Akaash Srikanth, Bharat Chandra, Binukumar G Nair, Nirmal K, Margarita Safonova, Shanti Prabha, Rekhesh Mohan, Jayant Murthy, Rajini G. K. 2021-02-09. Testing a Prototype 1U CubeSat on a Stratospheric Balloon Flight. https://arxiv.org/abs/2102.04847

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗

arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗

arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗