Search arXivSearch

arXiv · 2103.09991

A Soft-Aided Staircase Decoder Using Three-Level Channel Reliabilities

Abstract

The soft-aided bit-marking (SABM) algorithm is based on the idea of marking bits as highly reliable bits (HRBs), highly unreliable bits (HUBs), and uncertain bits to improve the performance of hard-decision (HD) decoders. The HRBs and HUBs are used to assist the HD decoders to prevent miscorrections and to decode those originally uncorrectable cases via bit flipping (BF), respectively. In this paper, an improved SABM algorithm (called iSABM) is proposed for staircase codes (SCCs). Similar to the SABM, iSABM marks bits with the help of channel reliabilities, i.e., using the absolute values of the log-likelihood ratios. The improvements offered by iSABM include: (i) HUBs being classified using a reliability threshold, (ii) BF randomly selecting HUBs, and (iii) soft-aided decoding over multiple SCC blocks. The decoding complexity of iSABM is comparable of that of SABM. This is due to the fact that on the one hand no sorting is required (lower complexity) because of the use of a threshold for HUBs, while on the other hand multiple SCC blocks use soft information (higher complexity). Additional gains of up to 0.53 dB with respect to SABM and 0.91 dB with respect to standard SCC decoding at a bit error rate of $10^{-6}$ are reported. Furthermore, it is shown that using 1-bit reliability marking, i.e., only having HRBs and HUBs, only causes a gain penalty of up to 0.25 dB with a significantly reduced memory requirement.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yi Lei, Bin Chen, Gabriele Liga, Alexios Balatsoukas-Stimming, Kaixuan Sun, Alex Alvarado. 2021-03-18. A Soft-Aided Staircase Decoder Using Three-Level Channel Reliabilities. https://doi.org/10.1109/jlt.2021.3096377

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Bistatic Target Detection by Exploiting Both Deterministic Pilots and Unknown Random Data Payloads

Integrated sensing and communication (ISAC) plays a crucial role in 6G, to enable innovative applications such as drone surveillance, urban air mobility, and low-altitude logistics. However, the hybrid ISAC signal, which comprises deterministic pilot and random data payload components, poses challenges for target detection due to two reasons: 1) these two components cause coupled shifts in both the mean and variance of the received signal, and 2) the random data payloads are typically unknown to the sensing receiver in the bistatic setting. Unfortunately, these challenges could not be tackled by existing target detection algorithms. In this paper, a generalized likelihood ratio test (GLRT)-based detector is derived, by leveraging the known deterministic pilots and the statistical characteristics of the unknown random data payloads. Due to the analytical intractability of exact performance characterization, we perform an asymptotic analysis for the false alarm probability and detection probability of the proposed detector. The results highlight a critical trade-off: both deterministic and random components improve detection reliability, but the latter also brings statistical uncertainty that hinders detection performance. Simulations validate the theoretical findings and demonstrate the effectiveness of the proposed detector, which highlights the necessity of designing a dedicated detector to fully exploited the signaling resources assigned to random data payloads.

cs.IT

On Unbiased Parameter Estimation and Signal Reconstruction

In this paper, we extend the theory of depth-unbiased source localization to unbiased parameter estimation and signal reconstruction for an arbitrary number of non-zero parameters. The topic touches on exact reconstructibility, most commonly studied in compressed sensing and multisource estimation across various imaging problems. The theoretical results derive upper bounds on the number of recoverable parameters in the noiseless case, and define a probability measure to assess the likelihood of recovering all non-zero parameters with correct magnitude order. The work provides a mathematical explanation of the open question regarding the noise robustness of standardized and unbiased methods. The paper also reveals a trade-off between the number of sensors and the signal-to-noise ratio. Numerical experiments demonstrate the theoretical findings.

cs.IT

Minimum enclosing Bregman balls made easy

In this work, we revisit the problem of computing minimum enclosing Bregman balls (Bregman MEBs) of finite sets of parameters. First, we show that Bregman MEBs are equivalent to MEBs of corresponding weighted point sets with respect to the power distance. We then report an efficient Frank--Wolfe $(1+ε)$-approximation algorithm for computing power MEBs, for any $ε>0$. This power MEB approximation algorithm coincides with the Bregman MEB approximation algorithm of Nock and Nielsen (2005) when expressed in the dual gradient space. Finally, we show that the Bregman potential lifting transforms used to construct Bregman Voronoi diagrams can be reinterpreted as the classical paraboloid lifting transform applied to corresponding weighted point sets. In particular, Bregman MEB circumcenters lie on the farthest Bregman Voronoi diagrams or equivalently on the corresponding farthest power diagrams.

cs.IT