Search arXivSearch

arXiv · 2105.13485

Avancee-1 Mission and SaDoD Method: LiDAR-based stimulated atomic disintegration of space debris (SaDoD) using Optical Neural Networks

Abstract

The surface degradation of satellites in Low Earth Orbit (LEO) is affected by Atomic Oxygen (AO) and varies depending on the spacecraft orbital parameters. Atomic oxygen initiates several chemical and physical reactions with materials and produces erosion and self-disintegration of the debris at high energy. This paper discusses Avancee-1 Mission, LiDAR-based space debris removal using Optical Neural Networks (ONN) to optimize debris detection and mission accuracy. The SaDoD Method is a Stimulated Atomic Disintegration of Orbital Debris, which in this case has been achieved using LiDAR technology and Optical Neural Networks. We propose Optical Neural Network algorithms with a high ability of image detection and classification. The results show that orbital debris has a higher chance of disintegration when the laser beam is coming from Geostationary Orbit (GEO) satellites and in the presence of high solar activities. This paper proposes a LiDAR-based space debris removal method depending on the variation of atomic oxygen erosion with orbital parameters and solar energy levels. The results obtained show that orbital debris undergoes the most intense degradation at low altitudes and higher temperatures. The satellites in GEO use Optical Neural Network algorithms for object detection before sending the laser beams to achieve self-disintegration. The SaDoD Method can be implemented with other techniques, but especially for the Avancee-1 Mission, the SaDoD was implemented with LiDAR technologies and Optical Neural Network algorithms.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Manuel Ntumba, Saurabh Gore. 2021-05-27. Avancee-1 Mission and SaDoD Method: LiDAR-based stimulated atomic disintegration of space debris (SaDoD) using Optical Neural Networks. https://doi.org/10.13140/rg.2.2.34878.82240

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det

Characterization of immersed SiPM arrays in liquid scintillator between room temperature and $-30\,^{\circ}\mathrm{C}$

Liquid scintillator detectors instrumented with distributed silicon photomultiplier (SiPM) arrays can be used in compact, topology-sensitive, and low-background experiments, but the temperature dependence of SiPMs immersed directly in the scintillation medium has not been widely characterized. We report the operation of a 125-liter linear-alkylbenzene-based liquid scintillator detector read out by 125 SiPM channels immersed in the active volume, over the range from room temperature to $-30\,^{\circ}\mathrm{C}$. The detector response was measured with cosmic-ray muons, including stopping muons followed by their Michel-electron decay. Cooling from $+15\,^{\circ}\mathrm{C}$ to $-30\,^{\circ}\mathrm{C}$ reduced the SiPM dark-count rate by a factor of 13.5, increased the single-photoelectron response by 49.1%, and increased the cosmic-ray muon light yield by 16.7%. The improved photoelectron separation and baseline stability at low temperature enabled a selection of stopping-muon events, from which the effective muon lifetime was measured to be $1959\pm132\,\mathrm{ns}$, consistent with the value expected for a hydrocarbon scintillator once $μ^{-}$ capture on carbon is taken into account.

physics.ins-det