Search arXivSearch

arXiv · 2106.13286

Modelling and Experimental Validation for Battery Lifetime Estimation in NB-IoT and LTE-M

Abstract

Internet of Things (IoT) is one of the main features in 5G. Low-power wide-area networking (LPWAN) has attracted enormous research interests to enable large scale deployment of IoT, with the design objectives of low cost, wide coverage area, as well as low power consumption. In particular, long battery lifetime is essential since many of the IoT devices will be deployed in hard-to-access locations. Prediction of the battery lifetime depends on the accurate modelling of energy consumption. This paper presents a comprehensive power consumption model for battery lifetime estimation, which is based on User Equipment(UE) states and procedures, for two cellular IoT technologies: Narrowband Internet of Things (NB-IoT) and Long Term Evolution for Machines (LTE-M). A measurement testbed has been setup and the proposed model has been tested and validated via extensive measurements under various traffic patterns and network scenarios, achieving the modelling inaccuracy within5%. The measurement results show that the battery lifetime of an IoT device can reach up to 10 years as required by 3GPP, with proper configuration of the traffic profile, the coverage scenario, as well as the network configuration parameters.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

André Sørensen, Hua Wang, Maxime Jérôme Remy, Nicolaj Kjettrup, René Brandborg Sørensen, Jimmy Jessen Nielsen, Petar Popovski, Germán Corrales Madueño. 2022-02-27. Modelling and Experimental Validation for Battery Lifetime Estimation in NB-IoT and LTE-M. https://doi.org/10.1109/jiot.2022.3152173

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

CSI Simulation: Why Additive Noise Fails and How to Fix It

Channel State Information (CSI) has become a widely used wireless channel sensing modality for applications such as indoor localization, activity recognition, and respiration monitoring. Because collecting labeled data under every target condition is impractical, training CSI-based models often relies on simulated data produced by adding noise or perturbations to recorded channel estimates, most commonly additive white Gaussian noise (AWGN). This practice assumes that the receiver chain between the antenna and the channel estimator is linear and gain-invariant. We test this assumption empirically using RF jamming as a controlled perturbation on 6 commodity receivers across 2 indoor environments. The assumption does not hold. Automatic gain control compresses the channel estimate multiplicatively before digitization, producing amplitude distributions that no additive noise variance can reproduce. To close the resulting fidelity gap, we propose M_QTC, a measurement-calibrated model that learns the per-subcarrier distribution transformation through quantile mapping, temporal filtering, and copula-based cross-subcarrier reordering. M_QTC reduces amplitude error 8-fold and closes 89% of the aggregate fidelity gap across four complementary dimensions. The improvement transfers directly to downstream tasks, where 5 classifiers from different families trained on M_QTC-simulated data recover 93% of real-data jamming detection performance, while AWGN-trained classifiers remain near random decision.

cs.NI

BALANCE: Hybrid Autoregressive-Speculative LLM Inference at the Network Edge

Edge inference is a promising paradigm to provide large language model (LLM) inference services in next-generation mobile networks. LLM inference mainly relies on two approaches: Autoregressive decoding (AD) generates output tokens sequentially, resulting in long latency; Speculative decoding (SD) accelerates inference by using a small language model (SLM) to generate multiple draft tokens for LLM verification, but incurs extra memory costs. Due to this latency-memory tradeoff, neither approach alone can efficiently serve users with heterogeneous demands under limited edge computing resources. To address this challenge, we propose a hybrid autoregressive-speculative inference (BALANCE) framework for edge LLM inference. In BALANCE, an edge server hosts both an SLM and an LLM, admits users, assigns each admitted user to the AD or SD mode, and performs the two modes simultaneously. To maximize the number of served users, we formulate a task throughput maximization problem to jointly determine user admission and computing resource allocation between AD and SD under user latency requirements and server memory constraints. Since the problem is NP-hard, we develop a polynomial-time algorithm that transforms the original problem into two sub-problems and obtains a sub-optimal solution with a constant approximation guarantee. Experiments demonstrate that BALANCE consistently outperforms conventional AD and SD and significantly improves task throughput.

cs.NI

Zero-Knowledge Remote Adversarial Attack against Wi-Fi-based Human Activity Recognition for Privacy Protection

The growing capability of Wi-Fi devices to identify human activities using channel state information (CSI) raises privacy concerns. To counter this threat, we propose GRAW, an adversary system, acting as a privacy defender, that degrades the human activity recognition (HAR) system at the user device by perturbing the router's signals that the device uses to estimate CSI. GRAW employs generative adversarial imitation learning (GAIL) to construct perturbation signals, and thereby eliminates the need for any information on the target HAR systems and their inputs (i.e., zero-knowledge operation). We evaluate GRAW against seven representative HAR models, using datasets collected in five environments, including our own dataset. We observe that GRAW is the only remote attack scheme that degrades every tested HAR model to a random-selection level. At the same perturbation level, GRAW achieves an attack success ratio up to 76.7% higher than comparison methods, while maintaining over 99% packet success rate on regular Wi-Fi communication. We demonstrate the feasibility of GRAW through real-time, over-the-air experiments with software-defined radios.

cs.NI