Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2107.11881

Ultra-Fast, High-Performance 8x8 Approximate Multipliers by a New Multicolumn 3,3:2 Inexact Compressor and its Derivatives

Fereshteh Karimi·Reza Faghih Mirzaee·Ali Fakeri-Tabrizi·Arman Roohi
View original source ↗Read source document ↗Export metadata ↓

Abstract

A multiplier, as a key component in many different applications, is a time-consuming, energy-intensive computation block. Approximate computing is a practical design paradigm that attempts to improve hardware efficacy while keeping computation quality satisfactory. A novel multicolumn 3,3:2 inexact compressor is presented in this paper. It takes three partial products from two adjacent columns each for rapid partial product reduction. The proposed inexact compressor and its derivates enable us to design a high-speed approximate multiplier. Then, another ultra-fast, high-efficient approximate multiplier is achieved utilizing a systematic truncation strategy. The proposed multipliers accumulate partial products in only two stages, one fewer stage than other approximate multipliers in the literature. Implementation results by Synopsys Design Compiler and 45 nm technology node demonstrates nearly 11.11% higher speed for the second proposed design over the fastest existing approximate multiplier. Furthermore, the new approximate multipliers are applied to the image processing application of image sharpening, and their performance in this application is highly satisfactory. It is shown in this paper that the error pattern of an approximate multiplier, in addition to the mean error distance and error rate, has a direct effect on the outcomes of the image processing application.

Explore related subjects

cs.AR

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Fereshteh Karimi, Reza Faghih Mirzaee, Ali Fakeri-Tabrizi, Arman Roohi. 2023-08-15. Ultra-Fast, High-Performance 8x8 Approximate Multipliers by a New Multicolumn 3,3:2 Inexact Compressor and its Derivatives. https://doi.org/10.1002/cta.3613

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Exploiting Decompression Latency for Covert Channels in Inter-Line-Compressed LLCs

The recently proposed XOR cache is an inter-line-compressed last-level cache (LLC) that leverages the data-inclusion relationship between the private caches and the LLC, compressing two cache lines into one by XORing them. The architecture relies on the cache coherence protocol for data decompression. In this paper, we demonstrate that this mechanism - specifically the latency asymmetry between a cache hit on an uncompressed vs. compressed line - introduces microarchitectural vulnerabilities. Based on this observation, we propose a covert channel attack targeting the XOR cache. A colluding sender controls the receiver's access latency by triggering decompression through targeted write requests to partner cache lines. By exploiting the data-dependent compression behavior of the XOR cache, the sender and receiver establish the channel using pre-agreed data values. The channel achieves higher bandwidth than the Prime+Probe baseline for two reasons: first, each bit is encoded in the compression state of an individual line rather than the occupancy of a cache set, so a single set carries multiple bits; second, each bit is resolved by manipulating coherence-protocol state rather than forcing shared-cache evictions, so it costs fewer LLC accesses and demand misses than Prime+Probe. Full-system simulations show a bandwidth of 2.9 Mbps at an observed 0.98% bit-error rate (BER) over 50,000 transmitted bits, 13.1 times the bandwidth of Prime+Probe under the same sub-1%-BER selection rule.

cs.AR↗
arXiv2026

Mamba-Family State-Space Model Kernels on a Programmable CGLA

Edge and embedded inference is constrained by power and data movement. Mamba-family state-space models replace attention with sequence-linear recurrence, but their inference path combines dense projections, short-reduction SSD kernels, and recurrent-state updates. This paper maps these kernel groups onto IMAX, a programmable CPU-Grounded Linear Array (CGLA), and measures them from kernel execution to token-level integration. Projection kernels match the long-reduction IMAX pipeline, whereas SSD Step-1 is limited by short reductions and kernel-boundary overheads. Mamba-130M token-level integration identifies projection GEMV as the decode bottleneck. These results show that programmable CGLAs fit long-reduction projection kernels, while SSD and decode-time projection support require boundary reduction and persistent-weight execution.

cs.AR↗
arXiv2026

Energy-Oriented CGLA Mapping of a Memory-Polynomial Digital Predistortion Kernel

Memory-polynomial digital predistortion (DPD) evaluates a small fixed coefficient set over a sliding input history, so its reduction step is a complex-MAC workload with local reuse. We map this DPD reduction kernel onto In-Memory Accelerator eXtension (IMAX), a programmable CPU-Grounded Linear Array (CGLA) composed of a one-dimensional processing-element/local-memory pipeline. For a (P,M)=(5,5) odd-order memory-polynomial instance, the mapping keeps the 120 B coefficient set in local memory, advances the five-tap history over 1024-sample tiles, and realizes the 15 order-delay terms as a 33-stage streaming complex-MAC reduction. The evaluation measures kernel latency and modeled energy. All measured paths use the same single-precision complex workload of 32 sequences, each with 2048 complex samples, across an IMAX FPGA prototype, a CUDA implementation on an RTX 4090 system, and an ARM-NEON implementation on Jetson AGX Orin. With this 1024-sample tile configuration, the IMAX FPGA prototype reports 20.201 ms end-to-end latency and 1.948 ms kernel-only latency. Using the previously reported 28 nm IMAX frequency and power model, the projected IMAX configuration gives 3.14 ms end-to-end latency and 0.34 ms kernel-only latency. The RTX 4090 baseline has the lowest end-to-end latency at 0.484 ms. Under model-based platform power accounting and the stated power assumptions, the projected IMAX configuration gives 169.1 times smaller modeled end-to-end energy per batch than the RTX 4090 baseline. This value uses platform power assumptions rather than workload-dependent runtime power or a direct silicon power measurement. A controlled synthetic PA-model validation checks that the same 15-term form improves test-set NMSE by 26.1 dB and ACLR by 26.0 dB. These results characterize the mapped memory-polynomial DPD reduction on IMAX for the evaluated tile configuration and power model.

cs.AR↗