Search arXivSearch

arXiv · 2108.01874

Modelling the Dissipation Range of von Kármán Turbulence Spectrum

Abstract

Noise pollution caused by inflow turbulence is a major problem in many applications, such as propellers and fans. Leading edge noise models, e.g., Amiet's model, are widely applied to predict the noise produced by these applications. This noise prediction model relies on the accuracy of the turbulence spectrum, which is usually assumed to be the von Kármán energy spectrum for isotropic turbulence. However, the von Kármán spectrum does not model accurately the dissipation range of the turbulent energy, resulting in incorrect far-field noise predictions for the high-frequency range. An exponential correction can be applied to the spectrum to model the dissipation range. This correction depends on the dissipation frequency, which is the frequency where the energy spectrum changes from a dependence of $k^{-5/3}$ to an exponential decay. This study experimentally investigates nearly isotropic inflow turbulence and determines the flow field characteristics that affect the dissipation frequency in order to model this frequency and the dissipation range. Experiments have been conducted with two passive grids and hot-wire anemometry in the Aeroacoustic Wind Tunnel of the University of Twente. The turbulence uniformity in the test section and the turbulence development in the streamwise direction were analyzed, showing that the grid generated turbulence was mostly uniform and nearly isotropic. The dissipation frequency was observed to depend on the turbulence intensity, the free-stream velocity, and the turbulence length scale. An expression to compute this frequency is proposed, as well as a formula to predict the dissipation range. The predicted leading edge noise is affected by the dissipation range modelling in the high-frequency range, presenting a decrease in level up to 17 dB for the highest frequencies.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

F. L. dos Santos, L. Botero-Bolívar, C. H. Venner, L. D. de Santana. 2021-08-04. Modelling the Dissipation Range of von Kármán Turbulence Spectrum. https://doi.org/10.2514/6.2021-2292

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn