Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2108.05035

Camera Calibration of the CTA-LST prototype

Yukiho Kobayashi·Akira Okumura·Franca Cassol·Hideaki Katagiri·Julian Sitarek·Paweł Gliwny·Seiya Nozaki·Yuto Nogami
View original source ↗Read source document ↗Export metadata ↓

Abstract

The Cherenkov Telescope Array (CTA) is the next-generation gamma-ray observatory that is expected to reach one order of magnitude better sensitivity than that of current telescope arrays. The Large-Sized Telescopes (LSTs) have an essential role in extending the energy range down to 20 GeV. The prototype LST (LST-1) proposed for CTA was built in La Palma, the northern site of CTA, in 2018. LST-1 is currently in its commissioning phase and moving towards scientific observations. The LST-1 camera consists of 1855 photomultiplier tubes (PMTs) which are sensitive to Cherenkov light. PMT signals are recorded as waveforms sampled at 1 GHz rate with Domino Ring Sampler version 4 (DRS4) chips. Fast sampling is essential to achieve a low energy threshold by minimizing the integration of background light from the night sky. Absolute charge calibration can be performed by the so-called F-factor method, which allows calibration constants to be monitored even during observations. A calibration pipeline of the camera readout has been developed as part of the LST analysis chain. The pipeline performs DRS4 pedestal and timing corrections, as well as the extraction and calibration of charge and time of pulses for subsequent higher-level analysis. The performance of each calibration step is examined, and especially charge and time resolution of the camera readout are evaluated and compared to CTA requirements. We report on the current status of the calibration pipeline, including the performance of each step through to signal reconstruction, and the consistency with Monte Carlo simulations.

Explore related subjects

astro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yukiho Kobayashi, Akira Okumura, Franca Cassol, Hideaki Katagiri, Julian Sitarek, Paweł Gliwny, Seiya Nozaki, Yuto Nogami. 2021-08-11. Camera Calibration of the CTA-LST prototype. https://doi.org/10.22323/1.395.0720

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Observations of Binary Stars with the 1.3-m Devasthal Fast Optical Telescope Using Speckle Interferometry: An Attempt

We present a feasibility study of implementing optical interferometry and speckle techniques with the 1.3-m Devasthal Fast Optical Telescope (DFOT) at Aryabhatta Research Institute of Observational Sciences (ARIES), which is currently dedicated to photometric observations. Using the sCMOS camera at the DFOT backend, we perform interferometric speckle observations of six binary stars. Standard Speckle Interferometry algorithms are applied to analyze the recorded speckle images. While this study does not aim to achieve the diffraction limit of DFOT or address a full science-driven resolution case, it serves as a crucial testbed for instrumentation, data acquisition, and analysis of Speckles with DFOT. Although the individual speckle patterns exhibit significant positional variations from frame to frame, the Speckle Interferometry analysis successfully recovers the characteristic three-peak structure of the wide binaries, allowing their relative separations and position angles to be determined, demonstrating the viability of the approach. The measured angular relative separations of $γ$ Leo, $γ$ Vir, and $ζ$ Her are $4.744'' \pm 0.012''$, $3.387'' \pm 0.027''$, and $1.582'' \pm 0.026''$, respectively, with corresponding projected position angles of $126.94^{\circ} \pm 0.14^\circ$, $171.57^{\circ} \pm 0.33^\circ$, and $81.06^{\circ} \pm 0.91^\circ$. These measurements are consistent with previously reported values in the literature, which provides strong motivation for more systematic observations and future implementation of optical interferometry techniques at meter-class telescopes.

astro-ph.IM↗
arXiv2026

Time-Domain Synthesis of Gravitational-Wave Detector Glitches using Class-Conditional Derivative Generative Adversarial Networks

Gravitational-wave detectors such as LIGO, Virgo, and KAGRA are highly sensitive instruments susceptible to many noise sources. Short-duration transient noise events, known as glitches, pose a particular challenge for data analysis pipelines, as they can mimic or obscure astrophysical signals. We present GlitchGAN, a class-conditional generative model built on the Conditional Derivative GAN (cDVGAN) architecture, capable of synthesizing seven glitch types from LIGO's third observing run (O3) directly in the time domain. GlitchGAN generalizes effectively, learning to reproduce a diverse glitch space consistent with high-quality DeepExtractor reconstructions, and can generate hybrid glitch morphologies by interpolating across its class-conditioning vector. It generates 1000 glitches in under 22 seconds on a CPU, suitable for detector simulations, mock data challenges, and pipeline validation. Synthetic glitches are validated using the Gravity Spy classifier and UMAP embeddings, both showing strong agreement with real data. To probe residual distributional differences, we train a separate holdout GlitchGAN model and use a downstream CNN to distinguish held-out real glitches from synthetic ones: detectability is high in a clean representation but drops substantially once both populations are injected into realistic detector noise, the condition under which they would typically be used. Despite this, GlitchGAN-generated glitches remain practically useful: augmenting real training sets with synthetic samples matches simple duplication of real data when data is abundant, and increasingly outperforms it as real data becomes scarce. Finally, we highlight a limitation of magnitude-only spectrograms: magnitude Q-transform classifiers can confidently misclassify physically unrealistic glitches from less robust models, underscoring the need for validation methods that preserve phase information.

astro-ph.IM↗
arXiv2026

SGN: A python framework for stream-processing pipelines

We present the Stream Graph Navigator (SGN), a lightweight Python framework for building streaming data applications. In SGN, stream-processing pipelines are built by connecting computational components into directed acyclic graphs that run within an event loop. The time-series extension of the SGN library, SGN-TS, introduces signal processing methods to handle time series data. Together, SGN and SGN-TS provide the foundation for SGNL, a matched-filtering gravitational-wave search pipeline, and are being adopted by multiple projects across the low-latency gravitational-wave data analysis infrastructure as an extensible and maintainable framework for future gravitational-wave observations.

astro-ph.IM↗