Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2111.11143

Unified Modeling of Unconventional Modular and Reconfigurable Manipulation System

Anubhav Dogra·Sakshay Mahna·Srikant Sekhar Padhee·Ekta Singla
View original source ↗Read source document ↗Export metadata ↓

Abstract

Customization of manipulator configurations using modularity and reconfigurability aspects is receiving much attention. Modules presented so far in literature deals with the conventional and standard configurations. This paper presents the 3D printable, light-weight and unconventional modules: MOIRs' Mark-2, to develop any custom `n'-Degrees-of-Freedom (DoF) serial manipulator even with the non-parallel and non-perpendicular jointed configuration. These unconventional designs of modular configurations seek an easy adaptable solution for both modular assembly and software interfaces for automatic modeling and control. A strategy of assembling the modules, automatic and unified modeling of the modular and reconfigurable manipulators with unconventional parameters is proposed in this paper using the proposed 4 modular units. A reconfigurable software architecture is presented for the automatic generation of kinematic and dynamic models and configuration files, through which, a designer can design, validate using visualization, plan and execute the motion of the developed configuration as required. The framework developed is based upon an open source platform called as Robot Operating System (ROS), which acts as a digital twin for the modular configurations. For the experimental demonstration, a 3D printed modular library is developed and an unconventional configuration is assembled, using the proposed modules followed by automatic modeling and control, for a single cell of the vertical farm setup.

Explore related subjects

cs.RO

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Anubhav Dogra, Sakshay Mahna, Srikant Sekhar Padhee, Ekta Singla. 2021-11-22. Unified Modeling of Unconventional Modular and Reconfigurable Manipulation System. https://doi.org/10.1016/j.rcim.2022.102385

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A Scalable Multi-Robot Framework for Decentralized and Asynchronous Perception-Action-Communication Loops

We develop a decentralized Perception-Action-Communication (PAC) system for multi-robot teams that enables them to collaborate in large scale, outdoor environments. Our system natively supports deployments at any scale by leveraging a graph neural network (GNN) to diffuse information hop-by-hop across the fleet's network. This achieves global collaboration from individual robots limited to local sensing and communication. Fully asynchronous, the core modules of PAC: perception, inter-robot communication, message aggregation and action are clocked at different frequencies with information flowing between them through buffers. We implement the PAC system as a series of highly extensible ROS2 nodes to serve as the foundational infrastructure for deployable swarm systems. PAC is validated in the real world with outdoor experiments with up to N=20 quadrotor robots and in simulations based on real-world data with up to N=100. These validations show that our system upholds crucial properties for field-deployable robot collectives: scalability, resiliency and repeatability.

cs.RO↗
arXiv2026

DexWrist: A Robotic Wrist for Constrained and Dynamic Manipulation

Development of dexterous manipulation hardware has primarily focused on hands and grippers. However, these end-effectors are often paired with bulky and highly stiff wrists that limit performance in human environments. More recent designs have adopted backdrivable actuation, but are still difficult to model and control due to coupled kinematics or high mechanical inertia from heavy links. We present DexWrist, a compact robotic wrist combining quasi-direct-drive actuation with a decoupled parallel kinematic mechanism to advance manipulation in highly constrained environments and enable dynamic, contact-rich tasks. It delivers 3.75$\pm$0.05 Nm rated torque, 0.33$\pm$0.06 Nm backdrive torque, 10.15$\pm$1.34 Hz torque bandwidth, $\pm 40^\circ$ ROM in both DOFs, and a diagonal velocity-constraint Jacobian (one-to-one motor-to-DOF mapping) in a 0.97 kg package. In practice, these properties increase workspace in clutter and stabilize contact without finely tuned admittance control. We evaluate DexWrist as a drop-in upgrade in simulation and on three robot arms across constrained and contact-rich tasks. In learned policy evaluations on the AgileX PiPER and UR3e, DexWrist achieved 50-76% relative improvements in success rate and reduced autonomous task completion times by 3-5x; on a torque-controlled Franka FR3, where a strong joint-impedance baseline already succeeds, it still completed the task 1.4x faster. Project page and videos: https://martinpeticco.com/dexwrist

cs.RO↗
arXiv2026

Imagine2Act: Leveraging Object-Action Motion Consistency from Imagined Goals for Robotic Manipulation

Relational object rearrangement (ROR) tasks (e.g., insert flower to vase) require a robot to manipulate objects with precise semantic and geometric reasoning. Existing approaches either rely on pre-collected demonstrations that struggle to capture complex geometric constraints or generate goal-state observations to capture semantic and geometric knowledge, but fail to explicitly couple object transformation with action prediction, resulting in errors due to generative noise. To address these limitations, we propose Imagine2Act, a 3D imitation-learning framework that incorporates semantic and geometric constraints of objects into policy learning to tackle high-precision manipulation tasks. We first generate imagined goal images conditioned on language instructions and reconstruct corresponding 3D point clouds to provide robust semantic and geometric priors. These imagined goal point clouds serve as additional inputs to the policy model, while an object-action consistency strategy with soft pose supervision explicitly aligns predicted end-effector motion with generated object transformation. This design enables Imagine2Act to reason about semantic and geometric relationships between objects and predict accurate actions across diverse tasks. Experiments in both simulation and the real world demonstrate that Imagine2Act outperforms previous state-of-the-art policies. More visualizations can be found at https://sites.google.com/view/imagine2act.

cs.RO↗