Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2111.13201

Fracture mechanical behavior of polymers: 1. Amorphous glassy state

Travis Smith·Chaitanya Gupta·Caleb Carr·Shi-Qing Wang
View original source ↗Read source document ↗Export metadata ↓

Abstract

Theoretical analyses and experiments have been carried out to investigate fracture behavior of glassy polymers. Our birefringence measurements quantify the local stress buildup at cut tip during different stages of drawing. Based on polymethyl methacrylate (PMMA), bisphenol A polycarbonate (PC) and polyethylene terephthalate (PET), we find several key results beyond the existing knowledge base. (1) The inherent fracture and yield strengths sigma_F(inh) and sigma_Y(inh) differ little in magnitude from the breaking and yield stress (sigma_b and sigma_y). (2) Stress intensification (SI) near a pre-through-cut builds up deviates from the theoretical description of linear elastic fracture mechanics (LEFM) upon approaching the cut tip. (3) SI meets a natural cutoff below which stress ceases to increase. (4) The stress stip at cut tip shows a trend of approximate linear increase with the far-field load s0 for all three polymers and different cut size a. (5) A characteristic length scale P emerges from the linear relation between stip and KI. For these glassy polymers, P is on the order of 0.1 mm. (6) Fracture toughness of brittle polymers is characterized by critical stress intensity factor K_Ic = sigma_F(inh)(2*pi*P)1/2, revealing relevance of the two crucial quantities. (7) The critical energy release rate GIc for brittle glass polymers such as PMMA is determined by the product of its work of fracture wF (of uncut specimen) and P. (8) The elusive fractocohesive length Lfc defined in the literature as G_Ic/w_F naturally arises from the new expression for G_Ic as stated in (7), i.e., it is essentially P. These results suggest that a great deal of future work is required to acquire additional understanding with regards to fracture and failure behaviors of plastics.

Explore related subjects

cond-mat.soft

Keep this discovery

BibTeXRIS

Travis Smith, Chaitanya Gupta, Caleb Carr, Shi-Qing Wang. 2021-11-25. Fracture mechanical behavior of polymers: 1. Amorphous glassy state. https://doi.org/10.1016/j.eml.2022.101819

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Slow Dynamics and the Geometry of Jammed Packings

Saddle points in the energy landscape of granular packings dominate the discrete steepest descent dynamics and ultimately determine the path that an out of mechanical equilibrium packing will follow and the resulting stable minimum that it will find. The saddle points that ultimately determine the resulting minima tend to be low-index saddle points. For models with an analytic energy landscape, such as the $p$-spin model, the steepest descent minimization path is affected by higher-index saddle points, which pull the system towards saddle points of decreasing index before arriving at the minima. Here, we examine the steepest descent minimization path of granular packings and compare them to the $p$-spin model. We show that the granular packing steepest descent minimization paths act like their smooth energy landscape counterparts and get attracted by saddle points. The index versus time curves for all models follow a shifted, stretched exponential. We further show that the shape parameter for the granular packings is unchanged when the energy landscape is modified to become analytic (Gaussian potential in a harmonic well) or non-local (Mari-Krzakala-Kurchan). The $p$-spin, on the other hand, has a significantly larger shape parameter. The reason is not due to the dimensionality, packing fraction, nonanalyticity, or the locality of the Hamiltonian of the models. The exact reason for the discrepancy in the shape parameter is \st{still} an unsolved mystery.

cond-mat.soft↗
arXiv2026

A Phase-Field Study of Desiccation Crack Pattern Maturation under Drying-Wetting Cycles

The characteristic intersection angle of the desiccation crack relaxes from near \ang{90} toward \ang{120} under repeated drying--wetting cycles. However, the theoretical understanding of this relaxation is insufficient, especially the modeling of the drying--wetting cycles. Here we introduce a phase-field model of desiccation fracture, extending the model proposed in previous studies by adding crack healing and a scar effect left by past cracks. By repeating drying--wetting cycles in a finite element simulation, we find that the angle distribution develops a growing peak near \ang{120} as the cycle number increases, consistent with experiments. The standard deviation of the intersection angle from \ang{120} relaxes exponentially with a characteristic time of about 2.85 cycles. These results are consistent with experiments, except that the characteristic time is slightly smaller than the experimental value. Crack energy dominates the total energy and also relaxes exponentially with nearly the same characteristic cycle as the angle relaxation. This decay is driven mainly by a shortening of the effective crack length rather than a change in effective fracture toughness.

cond-mat.soft↗
arXiv2026

Kinetics of ferritin crystal formation and melting in acoustically levitated droplets

Understanding protein crystallization pathways is essential for controlling crystallization in structural biology, materials science, and pharmaceutical applications. Classical nucleation theory does not fully capture crystallization processes for several proteins, including ferritin. Here, we combine acoustic levitation with small- and wide-angle X-ray scattering (SAXS and WAXS) to monitor ferritin crystallization in evaporating aqueous polyethylene glycol (PEG) solutions. Acoustic levitation rapidly drives the droplets through a broad range of protein and polymer concentrations, enabling time-resolved measurements of crystallization during evaporation. The scattering data show that ferritin crystals form during evaporation and subsequently lose their crystalline order upon further dehydration. Varying the PEG molecular weight switches between distinct crystallization pathways: one dominated by attractive protein-protein interactions and another dominated by repulsive interactions and excluded-volume effects. Furthermore, we find that lower molecular weight PEG (1000 g/mol) suppresses the dehydration-induced loss of crystalline order observed for higher molecular weight PEG (6000 g/mol), providing a simple strategy for improving protein crystal stability.

cond-mat.soft↗