Develop of a Pneumatic Force Sensor Prototype

Luis Alarcon; Job Ledezma

Home/Archive/arXiv

arXiv · 2201.00290

Develop of a Pneumatic Force Sensor Prototype

Luis Alarcon·Job Ledezma

View original source ↗Read source document ↗Export metadata ↓

Abstract

One of the difficulties of applying a SEA force control is the complexity that exists when implementing its three main components, which must work together one after the other. To facilitate the implementation of a force control by SEA, in this thesis the pneumatic force sensor is developed. A pneumatic force sensor differs from other force sensors in that it can work as a force sensor and as an elastic element. These features facilitate the implementation of force control by SEA, by reducing the number of components required. On the other hand, the pneumatic force sensor has reduced proportions to facilitate its installation in manipulator robots and biomechatronic prostheses. The first step that was made for the development of the pneumatic force sensor was the construction of the mathematical model of the sensor, to later use the MATLAB / Simulink software to simulate it. With the data obtained from the simulation of the mathematical model, the CAD model and the sensor planes were developed in SolidWorks software. Subsequently, the prototype of the pneumatic force sensor was built based on the plans made in the SolidWorks software. Once the stage of construction of the pneumatic force sensor was completed, the calibration and classification of the force sensor was carried out based on the UNE-EN ISO 376 standard, and the experimental tests were carried out to validate the sensor. Once the classification of the pneumatic force sensor was obtained, the results of the simulation of the mathematical model were compared with the results of the experimental test. vi In the comparison, it was possible to show a graphic coherence in the results obtained, validating the pneumatic force sensor system.

Explore related subjects

cs.RO

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Luis Alarcon, Job Ledezma. 2022-01-02. Develop of a Pneumatic Force Sensor Prototype. https://arxiv.org/abs/2201.00290

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Highly-Efficient Differentiable Simulation for Robotics

Robotics simulators have improved significantly in computational speed and scalability, enabling them to generate years of simulated data for complex systems in minutes or hours. Despite these advances, efficiently and accurately computing simulation derivatives remains an open challenge. Addressing this would accelerate the convergence of reinforcement learning and trajectory optimization algorithms, particularly for contact-rich problems. This paper introduces a unifying framework for robotic simulation that accounts for all factors, including dynamics, collisions, and friction. The resulting algorithm computes analytical derivatives of the simulation by implicit differentiation, explicitly handling the intrinsic non-smoothness of the collision and frictional stages while exploiting the sparsity induced by the multi-body structure. Benchmark results demonstrate state-of-the-art performance, with timings ranging from $5\,μ$s for a 7-dof manipulator to $95\,μ$s for a 36-dof humanoid, an improvement of at least two orders of magnitude over alternative methods. Implemented in C++, the code will be open-sourced after the review process to support applications such as simulation-driven learning and real-time control.

cs.RO↗

arXiv2026

GeCCo -- a Generalist Contact-Conditioned Policy for Loco-Manipulation Skills on Legged Robots

Most modern approaches to quadruped locomotion focus on using Deep Reinforcement Learning (DRL) to learn policies from scratch, in an end-to-end manner. Such methods often fail to scale, as every new problem or application requires time-consuming and iterative reward definition and tuning. We present Generalist Contact-Conditioned Policy (GeCCo) --- a low-level policy trained with Deep Reinforcement Learning that is capable of tracking arbitrary contact points with a quadruped robot. We shift from task-specific end-to-end learning to a modular hierarchy in which a single planner-agnostic, contact-conditioned tracking policy serves as a robust interface between planning and control. By maintaining stable contact execution under dynamic uncertainty and planner mismatch, the policy enables high-level planners (e.g., handcrafted, learned, or optimization-based) to be composed and swapped without retraining. We demonstrate the scalability and robustness of our method by evaluating on a wide range of locomotion and manipulation tasks in a common framework and under a single generalist policy. These include a variety of gaits, traversing complex terrains (e.g., stairs and slopes) as well as previously unseen stepping-stones and narrow beams, and interacting with objects (e.g., pressing a button, pushing a barrel). Our framework acquires new behaviors more efficiently, simply by combining a task-specific high-level contact planner and the pre-trained generalist policy. Project website: https://vassil-atn.github.io/gecco.github.io

cs.RO↗

arXiv2026

ERUPT: An Open Toolkit for Interfacing with Robot Motion Planners in Extended Reality

We present the Extended Reality Universal Planning Toolkit (ERUPT), an extended reality (XR) system for interactive motion planning. This paper serves to introduce our open-source system to others who can use it as a base to develop immersive robot interaction applications. Our system allows users to create and dynamically reconfigure environments while they plan robot paths. ERUPT uses XR to provide a broad range of natural interaction capabilities, allowing users to grab and adjust objects in the environment similar to interaction in the real world, rather than using a mouse and keyboard with the scene projected onto a 2D computer screen. Our system integrates with MoveIt, a manipulation planning framework, allowing users to send motion planning requests and visualize the resulting robot paths in virtual or augmented reality. We provide a broad range of interaction modalities, allowing users to modify objects in the environment and interact with a virtual robot. Our system allows operators to visualize robot motions, ensuring desired behavior as it moves throughout the environment, without risk of collisions within a virtual space, and to then deploy planned paths on physical robots in the real world. Code can be found at https://github.com/parasollab/erupt.

cs.RO↗