Search arXivSearch

arXiv · 2207.08404

Fully turbulent flows of viscoplastic fluids in a rectangular duct

Abstract

Turbulent flows of viscoplastic fluids at high Reynolds numbers have been investigated recently with direct numerical simulations (DNS) but experimental results have been limited. For this reason, we carry out an experimental study of fully turbulent flows of a yield stress fluid in a rectangular aspect ratio channel with a high-resolution laser doppler velocimetry (LDA) setup. We employ aqueous Carbopol solutions, often considered to be a simple yield stress fluid. We formulate different concentrations to address the effect of the rheology of the fluid on the turbulence statistics at an approximately constant Reynolds number. Additionally, we also perform experiments with a single Carbopol formulation at different Reynolds numbers to study its effect. The flow analysis is performed via rheology measurements, turbulence statistics and power spectral densities of velocity fluctuations. The addition of Carbopol to the flow increases turbulence anisotropy, with an enhancement of streamwise velocity fluctuations and a decrease in wall normal velocity fluctuations in comparison to water at the same mean velocity. This change is reflected on the power spectral densities of streamwise velocity fluctuations, where we observe a large increase in energy of large scale turbulent structures. Conversely, the energy of smaller scales is decreased in comparison to water, where the energy drops with a steeper scale than the Newtonian power law of $k_x^{-5/3}$. As we increase the Reynolds number with a Carbopol solution, the streamwise Reynolds stresses approach Newtonian values in the core, which suggests diminishing effects of shear-thinning. The power spectral densities reveal that the energy content at larger scales decreases slightly with the Reynolds number. However, the shear thinning effects do not disappear even as the Reynolds number approaches 50000.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Rodrigo S. Mitishita, Jordan A. MacKenzie, Gwynn J. Elfring, Ian A. Frigaard. 2022-07-18. Fully turbulent flows of viscoplastic fluids in a rectangular duct. https://doi.org/10.1016/j.jnnfm.2021.104570

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Kolmogorov scale in turbulence of surface gravity waves

In this paper, we study the analogue of the Kolmogorov scale in surface gravity wave turbulence, characterized by the cutoff wavenumber $k_c$ at which the power-law inertial range transitions into the dissipation range. We perform numerical simulations of the primitive dynamical equations with a broad-scale dissipation of magnitude $γ_0 k^2$ in spectral space to establish the relation between $k_c$ and $γ_0$. Our results show a scaling $k_c\simγ_0^β$, where $β$ depends on the slope $α$ of the power-law spectrum. We find that $β(α)$ agrees more closely with the prediction obtained by balancing the nonlinear and dissipation terms in the dynamical equations than with that based on the kinetic equation. This observation reveals that non-resonant triad interactions play a more significant role than resonant quartet interactions in the formation of $k_c$.

physics.flu-dyn

Structural identifiability and stress reconstruction from incomplete optical maps with velocimetry

Reconstructing the stress field of a planar viscoelastic flow from optical measurements loses its direct evidence wherever optical coverage is interrupted, and no improvement in optical precision restores an observation that was never made. We characterize what a second, velocity channel adds, and what neither channel can supply. Two calibrated optical components determine the local deviatoric stress pointwise, while velocity constrains spatial stress variation through momentum balance, so the two channels are complementary rather than redundant. The isotropic part of the stress is unobservable to both: the divergence of an isotropic field is a pure gradient, which the Leray projection annihilates, so every representable isotropic mode lies in the joint null space. That accounts for the null space exactly when the optical field is complete, and bounds it from below otherwise, since finite incomplete sampling and aperture zeros can remove further directions. We verify the count directly on three discretizations. In paired synthetic tests with finite measurement apertures, spatially correlated noise and optical stripe dropout, adding velocity reduces the mean whole-domain deviatoric error from 50.40% to 27.82% at 3% reference noise, and the improvement survives shared gaps, inverse-grid refinement at fixed physical sampling, and a constitutively generated stress field. The improvement does not rest on how the regularization parameter is chosen: it holds under both the expected-norm discrepancy rule and generalized cross-validation, and we report each selection with its position in the search interval, which is where the two rules differ.

physics.flu-dyn

A unified multirate lattice Boltzmann framework for thermosolutal dendritic solidification

Thermosolutal dendritic solidification involves interface evolution, solute diffusion, heat transfer, and melt flow over markedly different time scales. In lattice Boltzmann simulations, a single numerical time interval may place different transport processes in unfavorable relaxation ranges, while asynchronous updates require consistent transfer of phase-change contributions. To address these issues, a unified multirate multiple-relaxation-time lattice Boltzmann method is developed for thermal, solutal, and thermosolutal dendritic solidification. The coupled fields share a common moment-space framework but evolve at different update rates. The concentration and temperature source terms are separated into transport-related and phase-change contributions, and each resolved phase increment is used to immediately transfer the corresponding solutal and latent-heat contributions. The method reproduces characteristic dendritic morphologies and tip-velocity trends under pure diffusion and forced convection, with weak sensitivity to the tested update factors. Directional solidification over Lewis numbers \(Le=1\)--\(1000\) captures the transition from nearly planar to cellular and strongly branched growth, including vertically aligned dendrites and solute-rich interdendritic channels for saline water, in qualitative agreement with experiments. Source-coupling ablation shows that delayed coarse-step transfer produces increasingly strong local source pulses and eventual loss of numerical stability as time-scale separation increases, whereas phase-step instantaneous transfer remains stable over the tested conditions. These results demonstrate the applicability of the proposed framework to dendritic solidification with strongly separated transport time scales. The source code is publicly available in the \emph{DendriteLBM} repository.

physics.flu-dyn