Search arXivSearch

arXiv · 2208.13366

Environmental sub-MeV neutron measurement at the Gran Sasso surface laboratory with a super-fine-grained nuclear emulsion detector

Abstract

The measurement of environmental neutrons is particularly important in the search for new physics, such as dark matter particles, because neutrons constitute an often-irreducible background source. The measurement of the neutron energy spectra in the sub-MeV scale is technically difficult because it requires a very good energy resolution and a very high $γ$-ray rejection power. In this study, we used a super-fine-grained nuclear emulsion, called Nano Imaging Tracker (NIT), as a neutron detector. The main target of neutrons is the hydrogen (proton) content of emulsion films. Through a topological analysis, proton recoils induced by neutron scattering can be detected as tracks with sub-micrometric accuracy. This method shows an extremely high $γ$-ray rejection power, at the level of $5 \times 10^7 ~ γ/\rm{cm}^2$, which is equivalent to 5 years accumulation of environmental $γ$-rays, and a very good energy and direction resolution even in the sub-MeV energy region. In order to carry out this measurement with sufficient statistics, we upgraded the automated scanning system to achieve a speed of 250 g/year/machine. We calibrated the detector performance of this system with 880 keV monochromatic neutrons: a very good agreement with the expectation was found for all the relevant kinematic variables. The application of the developed method to a sample exposed at the INFN Gran Sasso surface laboratory provided the first measurement of sub-MeV environmental neutrons with a flux of $(7.6 \pm 1.7) \times 10^{-3} \rm{cm}^{-2} \rm{s}^{-1}$ in the proton energy range between 0.25 and 1 MeV (corresponds to neutron energy range between 0.25 and 10 MeV), consistent with the prediction. The neutron energy and direction distributions also show a good agreement.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

T. Shiraishi, S. Akamatsu, T. Naka, T. Asada, G. De Lellis, V. Tioukov, G. Rosa, R. Kobayashi, N. Ambrosio, A. Alexandrov, O. Sato. 2022-09-17. Environmental sub-MeV neutron measurement at the Gran Sasso surface laboratory with a super-fine-grained nuclear emulsion detector. https://doi.org/10.1103/physrevc.107.014608

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det