Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2209.10708

On the co-existence of transonic buffet and separation-bubble modes for the OALT25 laminar-flow wing section

Markus Zauner·Pradeep Moise·Neil D. Sandham
View original source ↗Read source document ↗Export metadata ↓

Abstract

Transonic buffet is an unsteady flow phenomenon that limits the safe flight envelope of modern aircraft. Scale-resolving simulations with span-periodic boundary conditions are capable of providing new insights into its flow physics. The present contribution shows the co-existence of multiple modes of flow unsteadiness over an unswept laminar-flow wing section, appearing in the following order of increasing frequency: (a) a low-frequency transonic buffet mode, (b) an intermediate-frequency separation bubble mode, and (c) high-frequency wake modes associated with vortex shedding. Simulations are run over a range of Reynolds and Mach numbers to connect the lower frequency modes from moderate to high Reynolds numbers and from pre-buffet to established buffet conditions. The intermediate frequency mode is found to be more sensitive to Reynolds-number effects compared to those of Mach number, which is the opposite trend to that observed for transonic buffet. Spectral proper orthogonal decomposition is used to extract the spatial structure of the modes. The buffet mode involves coherent oscillations of the suction-side shock structure, consistent with previous studies including global mode analysis. The laminar separation-bubble mode at intermediate frequency is fundamentally different, with a phase relationship between separation and reattachment that does not correspond to a simple `breathing' mode and is not at the same Strouhal number observed for shock-induced separation bubbles. Instead, a Strouhal number based on separation bubble length and reverse flow magnitude is found to be independent of Reynolds number within the range of cases studied.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Markus Zauner, Pradeep Moise, Neil D. Sandham. 2022-09-21. On the co-existence of transonic buffet and separation-bubble modes for the OALT25 laminar-flow wing section. https://doi.org/10.1007/s10494-023-00415-4

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn↗
arXiv2026

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn↗
arXiv2026

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn↗