Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2210.00622

Microwave probe sensing location for Venturi-based real-time multiphase flowmeter

Mengke Zhan·Cheng-Gang Xie·Jian-Jun Shu
View original source ↗Read source document ↗Export metadata ↓

Abstract

Real-time in-line interpretation of liquid properties is important for multiphase flow measurements. Therefore, it would be desirable to have a sensor, such as a microwave sensor, which can continuously measure the salinity of a flow. In addition to salinity measurement, the microwave sensor can also measure water fraction, which is required for a multiphase flowmeter based on single-energy gamma-ray attenuation; however, choosing a suitable probe sensing location for a microwave salinity sensor in a multiphase flowmeter can be challenging, as the sensor needs to be located at near-wall liquid-rich region to accommodate a wide range of flow conditions. Currently, a microwave sensor is installed in the lower area of a horizontal blind-tee inlet spool of a multiphase flowmeter for salinity measurement. Integrating the microwave sensor into the vertically mounted multiphase flowmeter can reduce the flowmeter (carbon) footprint and manufacturing costs and can improve water-to-liquid ratio measurement due to faster local oil-water mixing. The associated challenge is that the sensor needs to be located at near-wall liquid-rich region to accommodate a wide range of flow conditions, including high gas-volume-fraction flows, where the near-wall liquid layer present in the vertical pipe is usually very thin. In this study, computational fluid dynamics modeling is used to evaluate the suitability of four different sensing locations along the vertical cross-section of a Venturi-based multiphase flowmeter based on near-wall liquid-richness. The results show that the Venturi inlet is the most suitable location for microwave sensor measurement, compared to the mid-convergence section, the mid-divergence section, and the Venturi outlet for a range of inlet liquid-volume-fractions. The findings have been validated by experimental microwave sensor measurements in a multiphase flow loop facility.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mengke Zhan, Cheng-Gang Xie, Jian-Jun Shu. 2022-10-02. Microwave probe sensing location for Venturi-based real-time multiphase flowmeter. https://doi.org/10.1016/j.petrol.2022.111027

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Data-driven low-dimensional model for the onset of turbulence in plane Couette flow

We construct low-dimensional dynamical systems for low-Reynolds-number turbulence in plane Couette flow using Kernel Quantile Regression. Exploiting the finite-dimensional structure of attractors in dissipative systems, reduced-order models are learned from direct numerical simulation data using a small set of physically meaningful observables. The resulting discrete-time models accurately reproduce periodic and chaotic dynamics near the onset of turbulence. The minimum number of variables required for accurate prediction is found to be consistent with embedding theory based on the attractor dimension. For chaotic regimes, the models capture both short-term trajectory evolution and long-term statistical properties, including probability density functions. By incorporating the Reynolds number as an additional input variable, we further develop a parameter-dependent model that successfully reproduces the bifurcation structure over a range of Reynolds numbers, including bifurcations between training points. These results demonstrate the effectiveness of machine-learning-based reduced-order modeling for capturing the essential dynamics and statistics of weakly turbulent flows.

physics.flu-dyn↗
arXiv2026

Rapidly rotating internally heated convection: bounds on long-time averages

Convection on geophysical and astrophysical scales is subject to rapid rotation and strong heating from within the domain. In studying the long-time behaviour of the solutions for such a system, energy identities fail to capture the effects of rotation because the Coriolis force does no work, and rapid rotation can be prohibitive for direct numerical simulations. Instead, we derive an asymptotically reduced model for rapidly rotating convection driven by uniform internal heating between isothermal stress-free boundaries in a plane periodic layer. The main contribution is the proof of bounds on the mean temperature, and the mean vertical convective heat transport, in terms of the Rayleigh and Ekman numbers, in the limit of infinite Prandtl number. The first quantity represents the mixing of the flow, and the second the asymmetry in heat leaving the bottom and top boundaries due to convection, and unlike Rayleigh-Bénard convection, the two are not a priori related. We employ alternative estimation techniques to those used in previous studies (Grooms \& Whitehead, 2014 \textit{Nonlinearity}, 28, 29) and identify two distinct scaling behaviours for both quantities. Finally, our bounds are optimised, within the methodology, and provide a rigorous constraint for future studies of rotation-dominated internally heated convection.

physics.flu-dyn↗
arXiv2026

Baroclinic wave dynamics in the Ekman-free rotating rectangular annulus with localized forced plume

We report numerical simulations of a rotating rectangular annulus that isolates the Ekman-free bulk of the cylindrical baroclinic annulus, subjected to bi-directional temperature gradients imposed by a uniformly cooled inner wall and a localized forced heated plume at the outer bottom. The finite-volume OpenFOAM solver is employed across combinations of source Richardson number $Ri_0 = 99, 4, 1$ and Rossby number $Ro = 0.3, 0.1, 0.07$. A non-dimensional scaling of the governing equations identifies geostrophic-hydrostatic balance as the leading-order bulk state, a result confirmed a posteriori by the $x$ and $z-$momentum budgets. Baroclinic waves of mode $m=2$ at $Ro=0.3$ transition to $m=3$ as $Ro$ decreases, consistent with the contraction of the Eady deformation radius $L_ρ= NH/f$; Complex Empirical Orthogonal Function (CEOF) analysis characterizes the wave regime and detects a Hopf-bifurcated vacillating state at $Ri_0 = 99,~Ro = 0.1$. The plume morphology, classified through the Morton length scale and source flux-balance parameter, transitions from weak, laterally-swept structures at $Ri_0 = 99$ to sustained columnar plumes traversing the full baroclinic depth at $Ri_0 \leq 4$. The plume entrainment coefficient $Γ(z)$ shows opposite rotational sensitivities at low and high $Ri_0$, which we organize through a local plume Rossby number $Ro_p = w/(2Ωb)$. A mixing-length argument predicts a bulk turbulent heat flux $\overline{u'T'} \propto Ri_0^{-1/2}$, anticipating an order-of-magnitude enhancement from $Ri_0 = 99$ to $Ri_0 = 1$, in agreement with the simulations. A regime map in the $(Ri_0, Ro)$ plane reveals that, within the explored range, the plume-regime and wave-selection problems are approximately separable: $Ri_0$ sets the plume regime while $Ro$ selects the dominant baroclinic wave mode.

physics.flu-dyn↗