Search arXivSearch

arXiv · 2210.09935

Identification of the dynamic force and moment characteristics of annular gaps using linear independent rotor whirling motions

Abstract

Nowadays, most studies on the dynamic properties of annular gaps focus only on the force characteristics due to translational motions, while the tilt and moment coefficients are less well studied. Therefore, there is hardly any reliable experimental data for the additional coefficients that can be used for validation purpose. To improve this, a test rig first presented by Kuhr (2022) is used to experimentally determine the dynamic force and moment characteristics of three annuli of different lengths. By using active magnetic bearings, the rotor is excited with user-defined frequencies and the rotor position and the forces and moments induced by the flow field in the annulus are measured. To obtain accurate and reliable experimental data, extensive preliminary studies are carried out to determine the known characteristics of the test rig rotor and the added mass and inertia imposed by the test rig. Subsequently, an elaborate uncertainty quantification is carried out to quantify the measurement uncertainties. The experimental results, i.e. the 48 rotordynamic coefficients, are compared to a new calculation method. It is shown that the presented experimental data agree well with the calculation method, especially for the additional rotordynamic tilt and moment coefficients. Furthermore, it is shown that the annulus length significantly influences the coefficients of the first sub-matrix. A dependence of the additional coefficients on the length is recognisable, but less pronounced. Even for the shortest investigated annulus, i.e. L = 1, the stiffness coefficients due to the forces from the angular motion of the rotor are of the same order of magnitude as the stiffness coefficients due to the forces from the translational motion. This supports recent results, indicating that the additional coefficients become relevant much earlier than assumed throughout the literature, cf. Childs (1993).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Maximilian M. G. Kuhr. 2022-10-18. Identification of the dynamic force and moment characteristics of annular gaps using linear independent rotor whirling motions. https://doi.org/10.1016/j.ymssp.2022.109936

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn