Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2210.13766

Optimizing the Homogeneity and Efficiency of an SOEC Based on Multiphysics Simulation and Data-driven Surrogate Model

Yingtian Chi·Kentaro Yokoo·Hironori Nakajima·Kohei Ito·Jin Lin·Yonghua Song
View original source ↗Read source document ↗Export metadata ↓

Abstract

Inhomogeneous current and temperature distributions are harmful to the durability of the solid oxide electrolysis cell (SOEC). Segmented SOEC experiments reveal that a high steam utilization, which is favorable for system efficiency, leads to local steam starvation and enhanced the inhomogeneity. It is necessary to consider inhomogeneity and efficiency jointly in optimization studies. Three-dimensional (3D) multiphysics models validated with experiments can simulate the inhomogeneity in a reliable manner, but they are unsuitable for optimization due to the high computational cost. This study proposes a method that combines segmented SOEC experiments, multiphysics simulation, and artificial intelligence to optimize the inhomogeneity and efficiency of SOEC jointly. A 3D cell model is first built and verified by segmented SOEC experiments. Then, fast neural network surrogate models are built from the simulation data and integrated into a multi-objective optimization problem. Its solutions form a Pareto front reflecting the conflicting relationships among different objectives. It is found that the down-stream current is 60%-65% of the up-stream current when the steam utilization is 0.7. To increase the steam utilization to 0.8, the down-stream current will further drop to 50%-60% of the up-stream current. The Pareto fronts enable system operators to achieve a balance between efficiency and inhomogeneity.

Explore related subjects

eess.SYcs.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yingtian Chi, Kentaro Yokoo, Hironori Nakajima, Kohei Ito, Jin Lin, Yonghua Song. 2022-10-25. Optimizing the Homogeneity and Efficiency of an SOEC Based on Multiphysics Simulation and Data-driven Surrogate Model. https://arxiv.org/abs/2210.13766

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Safe learning-based control via function-based uncertainty quantification

Uncertainty quantification is essential when deploying learning-based control methods in safety-critical systems. This is commonly realized by constructing uncertainty tubes that enclose the unknown function of interest, e.g., the reward and constraint functions or the underlying dynamics model, with high probability. However, existing approaches for uncertainty quantification typically rely on restrictive assumptions that encode smoothness properties of the unknown function, such as a known norm in a function space. Moreover, these methods usually struggle with discontinuities. In this paper, we model the unknown function as a random function from which independent and identically distributed realizations can be generated. We then construct uncertainty tubes via the scenario approach that hold with high probability. Our uncertainty tubes rely solely on sampled realizations and can therefore accommodate discontinuities represented by the sampling model. We integrate these uncertainty tubes into a safe Bayesian optimization algorithm with which we safely tune control parameters on a real Furuta pendulum.

eess.SY↗
arXiv2026

Enhanced ShockBurst for Ultra Low-Power On-Demand Sensing

On-demand sensing requires battery-powered Internet-of-Things (IoT) and implantable medical devices to remain in deep sleep and activate wireless communication only when data transmission is required. In such systems, battery lifetime depends strongly on radio active time. This work investigates how communication architecture and physical layer (PHY) configuration influence radio active time by comparing connection-oriented Bluetooth Low Energy (BLE) with connectionless Enhanced ShockBurst (ESB) on identical BLE-compatible hardware. Under identical 2 Mbps PHY configurations, ESB reduces wake-up latency and energy consumption to approximately one-twentieth of BLE by eliminating connection establishment and maintenance overhead. Increasing the ESB PHY rate from 2 to 4 Mbps further shortens packet airtime by approximately 52% and reduces transmission energy by approximately 43%. Finally, a first-in, first-out (FIFO)-triggered implantable loop recorder prototype demonstrates that jointly optimizing communication architecture, PHY configuration, and buffered transmission enables sleep-wake operation and reduces total system power consumption by approximately 60% compared with conventional BLE operation. These results identify minimizing radio active time as a key design principle for ultra-low-power on-demand sensing and provide practical guidance for battery-powered sensing systems.

eess.SY↗
arXiv2026

Receding Horizon Multi-Agent Deceptive Path Planner

Deceptive path planning enables autonomous agents to obscure their true goals from observers by deviating from an expected optimal path. Prior work largely solves full-horizon, end-to-end optimization for single agents, which is expensive to recompute online and difficult to scale or adapt en route. We propose a unified framework for deceptive path planning using a Boltzmann distribution, computing over short-horizon candidate trajectories within a receding-horizon loop. By param- By iterating a user-defined cost that captures deception, resources, and smoothness, and optionally includes coupling terms between agents, the framework yields stochastic policies that balance the tradeoff between optimal paths and deceptive deviation. Policies are updated locally and do not require training. The level of deception and adherence to constraints can be dynamically tuned, enabling online adaptation to changes in goals and constraints such as obstacles. This step-by-step tuning opens the door to new forms of dynamic deception. Simulation studies demonstrate the flexibility of our approach, maintaining deception while adapting to environmental and constraint updates, avoiding the recomputation required by full-horizon methods, and supporting intuitive tuning via a small set of parameters

eess.SY↗