Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2210.15667

Probabilistic Prediction of Coalescence Flutter Using Measurements: Application to the Flutter Margin Method

Sandip Chajjed·Mohammad Khalil·Dominique Poirel·Chris Pettit·Abhijit Sarkar
View original source ↗Read source document ↗Export metadata ↓

Abstract

Zimmerman and Weissenburger's flutter margin method is widely used to estimate the aeroelastic coalescence flutter speed. In contrast to aeroelastic decay rates, the flutter margin exhibits monotonic decay with respect to airspeed redering it effective in extrapolating the flutter speed using flight test data conducted at pre-flutter airspeeds. This paper reports the generalization of the Bayesian formulation of the flutter margin method by Khalil et al. developed to tackle measurement and modeling uncertainties. This paper improves the predictive performance of the previous algorithm by incorporating the joint prior of aeroelastic modal frequencies and decay rates among airspeeds in order to better estimate the joint posterior of modal parameters using observational data. The modal parameter prior is constructed using the classical two-degree-of-freedom pitch-plunge aeroelastic model whose system matrices (e.g. structural stiffness and damping matrices) vary randomly. Such joint modal parameter prior enforces statistical dependence among posteriors of modal parameters and the associated flutter margins across airspeeds. Numerical studies demonstrate a considerable reduction of uncertainties on the predicted flutter speed obtained from the generalized Bayesian flutter margin method. This improved algorithm can cut cost by reducing the number of flight tests and better assess the uncertainty against aeroelastic flutter.

Explore related subjects

cs.CE

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sandip Chajjed, Mohammad Khalil, Dominique Poirel, Chris Pettit, Abhijit Sarkar. 2022-10-25. Probabilistic Prediction of Coalescence Flutter Using Measurements: Application to the Flutter Margin Method. https://arxiv.org/abs/2210.15667

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

KATOsuper: Surrogate-accelerated neural topology optimization with sensitivity-consistent Fourier neural operators

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

cs.CE↗
arXiv2026

Geometry-Based Metrics for Early-Stage Hull-Form Producibility Screening

This paper presents a representation-aware framework for geometry-based screening of hull-form producibility at early design stages. The proposed signature combines dimensionless total and signed developability deviation with curvature-class area fractions, distributed fields, metric-specific validity, and representation provenance. These descriptors characterize surface features relevant to plate forming and developability, but are not calibrated predictors of fabrication cost, forming effort, or process feasibility. Native IGES/STEP boundary representations (BReps) are evaluated through direct differential geometry and trimmed-domain quadrature, whereas triangulated surfaces use discrete curvature recovery and area-weighted aggregation. Analytical and semi-analytical controls verify the formulation, while matched-face BRep-to-mesh tests assess discrete curvature recovery. Application to DTMB 5415, KCS, JBC, and KVLCC2M shows that curvature intensity and areal extent provide complementary information and that derivative-based outcomes can be representation sensitive. KCS, for example, exhibits approximately 24% greater developability deviation than DTMB 5415, while double-curved regions occupy 72.9% of its valid surface versus nearly the entire DTMB valid surface. The resulting quantities provide an early geometric screening layer for subsequent use as objectives, constraints, surrogate responses, or design-space features. HullProd, the companion open-source software, implements the signature, distributed fields, validity, and provenance.

cs.CE↗
arXiv2026

Topology optimization of multimaterial aircraft pylons using generalized shape function approach

As the primary structural component connecting the engine to the wing or fuselage, an aircraft pylon requires optimized structural efficiency; this paper provides topology optimization of multimaterial pylons using the generalized shape function (gSF) approach. The gSF method uses $n$ natural-coordinate design variables per element to provide optimized designs up to $2^n$ distinct material phases while promoting close to discrete material layouts in conjunction with the density and formulated Heaviside projection filters. Pylon structural compliance is minimized subject to volume constraints. Exploiting the geometric features of a typical pylon structure, multimaterial evolution is performed on a corresponding 2D design domain representing the midplane, with up to 14 candidate materials. The optimized two-dimensional layout is then extruded to achieve the corresponding three-dimensional optimized pylon structure. The Method of Moving Asymptotes is employed to achieve the final design variables. The resulting convergence histories exhibit smooth and stable objective minimization. The results highlight the capability of the multimaterial topology optimization framework to effectively optimized aircraft pylons with multiple candidate materials, without requiring a considerable expansion of the design variable set.

cs.CE↗