Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2211.01719

Design and preliminary operation of a laser absorption diagnostic for the SPIDER RF source

M. Barbisan·R. Pasqualotto·A. Rizzolo
View original source ↗Read source document ↗Export metadata ↓

Abstract

The ITER Heating Neutral Beam (HNB) injector is required to deliver 16.7 MW power into the plasma from a neutralised beam of H-/D- negative ions, produced by an RF source and accelerated up to 1 MeV. To enhance the H-/D- production, the surface of the acceleration system grid facing the source (the plasma grid) will be coated with Cs because of its low work function. Cs will be routinely evaporated in the source by means of specific ovens. Monitoring the evaporation rate and the distribution of Cs inside the source is fundamental to get the desired performances on the ITER HNB. In order to proper design the source of the ITER HNB and to identify the best operation practices for it, the prototype RF negative ion source SPIDER has been developed and built in the Neutral Beam Test Facility at Consorzio RFX. A Laser Absorption Spectroscopy diagnostic will be installed in SPIDER for a quantitative estimation of Cs density. By using a wavelength tunable laser, the diagnostic will measure the absorption spectrum of the 852 nm line along 4 lines of sight, parallel to the plasma grid surface and close to it. From the absorption spectra the line-integrated density of Cs at ground state will be measured. The design of this diagnostic for SPIDER is presented, with details of the layout and of the key components. A preliminary installation of the diagnostic on the test stand for Cs ovens is also described, together with its first experimental results; the effect of ground state depopulation on collected measurements is discussed and partially corrected.

Explore related subjects

physics.plasm-phphysics.acc-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M. Barbisan, R. Pasqualotto, A. Rizzolo. 2022-11-03. Design and preliminary operation of a laser absorption diagnostic for the SPIDER RF source. https://doi.org/10.1016/j.fusengdes.2019.04.092

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Scalable Terbium-149 Production from Highly Enriched Gadolinium-150 Targets

We propose a two-stage production method to overcome existing supply-constraints for the alpha-emitter $^{149\mathrm{g}}$Tb, a promising candidate for Targeted Alpha Therapy (TAT) with no existing globally scalable production pathway. Although awaiting experimental measurement of the $^{150}$Gd(p,2n)$^{149\mathrm{g}}$Tb cross section, the proposed method could produce $^{149\mathrm{g}}$Tb at clinical scale and beyond on readily available proton cyclotrons, enabled by production of the extinct but long-lived isotope $^{150}$Gd, a pure alpha emitter with a 1.79 million year half-life. Stage one generates $^{150}$Gd feedstock by irradiating natural Eu or enriched $^{151}$Eu with $\gtrsim$10 MeV protons, neutrons or photons. Stage two produces $^{149\mathrm{g}}$Tb from fabricated $^{150}$Gd targets by driving the $^{150}$Gd(p,2n)$^{149\mathrm{g}}$Tb reaction with $\gtrsim$14 MeV protons, accessible on over 700 reported cyclotrons worldwide. Fast fusion neutrons appear to offer the most scalable pathway for $^{150}$Gd production: even with a large $^{149 \mathrm{g}}$Tb dose size of 1 GBq and 40 million administered doses/yr, we estimate this would require neutrons produced by only 6.8 megawatts of steady-state deuterium-tritium power to produce the required $^{150}$Gd, far below expected capacity in the next decade. The route described here, if validated, would enable $^{149\mathrm{g}}$Tb supply at the scale needed to support clinical development of $^{149\mathrm{g}}$Tb-based TAT.

physics.plasm-ph↗
arXiv2026

Analytic toroidal 3D MHD equilibria and steady Euler flows with invariant surfaces

Families of explicit analytic solutions of the magnetohydrodynamic equilibrium equations are presented, equivalent to steady incompressible Euler flow. The solutions are non-axisymmetric and possess exact nested toroidal flux surfaces. No expansion is made in inverse aspect ratio or in the deviation from axisymmetry. The magnetic field and flux surfaces are given explicitly in Cartesian coordinates using elementary functions. The field, current density, and scalar pressure are smooth over the toroidal domain. The pressure gradient vanishes only on the magnetic axis. One family of solutions has uniform rotational transform $ι=2$, while another family has a sheared $ι$ profile. These counterexamples to Grad's conjecture are valuable for understanding the existence and regularity of 3D equilibria and for testing numerical codes.

physics.plasm-ph↗
arXiv2026

Dynamics of an impulse dielectric barrier discharge in pure ammonia gas using electrical characteristics and imaging analysis

A glow nanosecond discharge from a plane-to-plane impulse dielectric barrier discharge (iDBD) with ammonia gas has been characterised by employing fast imaging and electrical diagnostics. More precisely, the aim of this study is to investigate the dynamics of the discharge establishment under various conditions of applied voltage, pressure, and gas gap. The comparison between the current measurements and the image analysis exposes a strong correlation between the fast excitation and ionization wave velocity and the rising current velocity. This correlation has been found only for diffuse mode discharge since a front wave could be clearly defined, denoted as the luminous propagation front (LPF). Furthermore, this correlation is supported by a proportionality factor of 1.5 10$^{-3}$ which is systematic over the studied conditions. Further investigations are considered to evaluate the relevance of such a value over more parameters.

physics.plasm-ph↗