Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2211.08059

An augmented swirling and round jet impinging on a heated flat plate and its heat transfer characteristics

Premchand V Chandra·Pratikash P Panda·Pradip Dutta
View original source ↗Read source document ↗Export metadata ↓

Abstract

A geometrical mechanism that generates augmented swirling and round jets is being proposed. The proposed geometry has an axial inlet port and three tangential inlet ports, each of diameter 10mm. A parameter called Split ratio, defined as the percentage of airflow split through these inlet ports, is introduced for the augmented jet. Flow at four different split ratios(SR 1,2,3, and 4) results in a single augmented jet of swirling and round jets of diameter D = 30mm, for which impingement heat transfer is predicted using 3D RANS numerical simulations. Also, computations for conventional round jets and swirling jets generated by an in-house geometrical vane swirler of 45, 60 and 30 degree vane angles each of jet diameter D = 30 mm are performed for the Reynolds number (Re = 6000 to 15,000) and at a jet-plate distance (H = 1.5D to 4D). A comparative study of the flow structures for all the jets using computations is done, followed by a limited discussion on Particle Image velocimetry (PIV) flow visualization results. An impingement heat transfer analysis for all the jets is studied numerically. It is inferred that at a smaller jet-plate distance H =1.5D, the augmented jet and vane swirler jets showed an improved heat transfer from the impingement surface (heated flat plate). In contrast, the conventional round jets showed maximum heat transfer at H = 4D. From the comparative study, the impingement heat transfer characteristics using the proposed augmented jet are better at an optimized jet-plate distance H=1.5D and at a split ratio (SR 4), with an enhancement in the average Nusselt number (Nu avg) of 88% than the conventional round jet and 101% than the vane-swirler jet counterpart. Similarly, an enhancement in the stagnation Nusselt number (Nu stg) of 189% than the round jet is predicted for the proposed augmented jet at SR-4.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Premchand V Chandra, Pratikash P Panda, Pradip Dutta. 2022-11-15. An augmented swirling and round jet impinging on a heated flat plate and its heat transfer characteristics. https://doi.org/10.1016/j.icheatmasstransfer.2023.107121

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗