Search arXivSearch

arXiv · 2211.08918

Characterisation of Timau National Observatory using limited in-situ measurements

Abstract

A new astronomical observatory in southeastern Indonesia is currently under construction. This Timau National Observatory will host a 3.8-metre telescope for optical and near-infrared observations. To support the operation and planning, the characterisation of the site needs to be appropriately performed. However, limited resources and access to the site hindered the deployment of instruments for comprehensive site testing. Fortunately, \emph{in-situ} sky brightness data from the Sky Quality Meter (SQM) have been available for almost two years. Based on the data acquired in 470 nights, we obtain a background sky brightness of $μ_0=21.86\pm0.38$ magnitude/arcsec$^2$. Additionally, we evaluate the moonlit sky brightness to estimate the atmospheric extinction coefficient ($k$) and level of scattering on site. We find an alleviated value of $k=0.48\pm0.04$, associated with a high atmospheric aerosol content. It is considered regular for an equatorial area situated at a low altitude (${\sim}1300$ masl). By analysing the fluctuation of the sky brightness and infrared images from \emph{Himawari-8} satellite, we estimate the available observing time (AOT) of at least $5.3$ hours/night and the yearly average percentage of usable nights of $66\%$. The monthly average AOT from SQM and satellite data analysis correlate with $R=0.82$. In terms of the monthly percentage of usable nights, the correlation coefficient is $R=0.78$. During the wet season (November-April), the results from SQM and satellite data analysis deviate more significantly, mainly due to the limited capability of Himawari-8 in detecting fragmented low-altitude clouds. According to these results, we expect Timau to complement other observatories greatly.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Rhorom Priyatikanto, Emanuel Sungging Mumpuni, Taufiq Hidayat, Muhammad Bayu Saputra, Mulya Diana Murti, Abdul Rachman, Clara Yono Yatini. 2022-12-13. Characterisation of Timau National Observatory using limited in-situ measurements. https://doi.org/10.1093/mnras%2Fstac3349

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM