Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2212.02213

On the gas heating effect of helium atmospheric pressure plasma jet

Fellype do Nascimento·Torsten Gerling·Konstantin Georgiev Kostov
View original source ↗Read source document ↗Export metadata ↓

Abstract

Plasma medicine is an emerging research field which has been driven by the development of plasma sources suitable to generate low temperature plasmas. In many cases, such devices can operate without a gas flow, producing a plasma discharge from the ambient air. However, the most common case is the use of a working gas at a given flow rate to produce a plasma jet. Helium (He) is one of the gases commonly used as the carrier gas to generate cold atmospheric pressure plasma jets (CAPPJs) due mainly to the easiness to ignite a gas discharge with it. However, in this work it was observed that most of the heating of a He CAPPJ can come just from the expansion of the He gas. This was found through measurements of gas temperature ($T_{gas}$), using fiber optic temperature (FOT) sensors, and thermal output, using both FOT and infrared imaging with the He flow impinging on a copper (Cu) plate. Such findings were achieved through comparisons of $T_{gas}$ and the temperature on the Cu ($T_{Cu}$) plate in the conditions with and without discharge ignition, as well as comparing $T_{gas}$ in the free gas/jet mode with and without discharge ignition. It was verified that the $T_{gas}$ values increased as the distance from the gas outlet was enlarged, especially at low He flow rates, even without discharge ignition. Despite the temperature increase with distance, it is possible to produce plasma jets with temperatures lower than 40 $^\circ$C at low He flow rates.

Explore related subjects

physics.plasm-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Fellype do Nascimento, Torsten Gerling, Konstantin Georgiev Kostov. 2023-04-14. On the gas heating effect of helium atmospheric pressure plasma jet. https://doi.org/10.1088/1402-4896%2Faccb17

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The quadratic density response function for non-interacting fermions at arbitrary temperature

We develop and implement the quadratic density response function of non-interacting fermions at arbitrary temperature, frequencies, and wave vectors. Starting from a Green's function formulation, we derive the quadratic response and demonstrate its equivalence to the result obtained from the Wigner equation. We further derive the classical limit through a perturbative expansion of the Vlasov equation and demonstrate that the quantum and classical formulations agree in the high-temperature limit. We analyse the limiting behaviour with respect to wavenumber and derive the zeroth harmonic response. Two independent implementations are provided and extensively benchmarked against density-functional theory, canonical path integral Monte Carlo (PIMC), and grand canonical PIMC simulations. As the density response of the interacting electron gas is commonly modelled through the ideal response functions and approximate models for the local field correction, the presented formulation will also allow for more complete explorations of interacting systems. Especially, our efficient implementation, which evaluates the ideal static and dynamic quadratic response functions in less than 0.5 ms on a 1.3 GHz processor, will enable evaluation of quadratic corrections to integrated quantities such as interaction potentials and stopping powers in warm dense matter.

physics.plasm-ph↗
arXiv2026

Prediction of Re-Ignition Times in Dielectric Barrier Discharges

Discharge ignition events in dielectric barrier discharges (DBDs) self-organise into spatio-temporal patterns with varying degrees of order. The complex dynamics of a DBD and intricate structure of occurring patterns complicate the formulation of predictive, mechanistic descriptions. We present the formulation of a reduced-order model that describes the re-ignition dynamics between consecutive discharges appearing at the same position inside a DBD arrangement. The model is derived from an equivalent electric circuit and validated against fluid-Poisson simulations and experiments performed with a multi-filament arrangement in air-like gas mixtures at atmospheric pressure driven by sinusoidal high-voltage waveforms. The experimental scenarios include a highly ordered regime where discharges ignite at regular time and space intervals generating a pattern stable over several periods, and an unstable regime with discharges appearing at seemingly random positions and times. The model accuracy is assessed in both regimes and it is found that the associated prediction uncertainty provides a quantitative measure of the spatial order of the discharge pattern.

physics.plasm-ph↗
arXiv2026

PQLS: A Quasilinear Gyrokinetic Transport Solver with a Bayesian Saturation-Rule Closure

Quasilinear models make gyrokinetic turbulent-transport predictions sufficiently fast for integrated modelling, but their predictive capability is limited by two factors: the physical and geometrical applicability of the linear solver, and the validity of the saturation rule used to close the model. We present the Predictive Quasilinear Solver (PQLS), a quasi- linear gyrokinetic transport solver formulated in general magnetic geometry. Its implementation as an eigenvalue solver retains electromagnetic and collisional effects, provides access to dominant and subdominant modes and is differen- tiable with respect to all plasma parameters. Linear benchmarks against GENE reproduce the growth rates, frequencies, and eigenfunctions. We additionally formulate the saturation-rule closure as a Bayesian inference problem that distin- guishes uncertainty in its fitted coefficients from the residual model-form uncertainty. The approach is demonstrated by calibrating the SAT3 rule on PQLS quasilinear weights against published nonlinear CGYRO cases. In addition to improving the robustness of the calibration, the new method also quantifies the uncertainty in each of the fit coefficients. Such uncertainty is propagated through transport calculations to produce error-aware profiles that are compared to the ones obtained from the full gyrokinetic simulation, showing excellent agreement.

physics.plasm-ph↗