Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2302.05775

Implementation and Performance Analysis of a Low Resolution OFDM System Prototype With Low Cost Hardware

Eder O. de Souza·João T. Dias·Demerson N. Gonçalves
View original source ↗Read source document ↗Export metadata ↓

Abstract

The present work focus on the implementation and analyze of performance of a low-resolution OFDM system prototype with low-cost hardware. A software defined radio (SDR) system was chosen in this implementation due to its various advantages over a traditional radio system. Among the options of SDR devices available, the use of universal software radio peripherals (USRP) was avoided due to its high cost, despite its popularity in this field of research. Alternatively, a combination of two low-cost SDRs, "Hackrf One" and "RTL- SDR Blog V3" with the GNU Radio, a popular, free and open source radio software, were used. Thus, it was possible to emulate the behavior of a low resolution ADC in the receiver, characterize its performance and estimate its energy savings. This allowed us to determine the feasibility of building a component with the analog-to-digital conversion function with few bits of resolution. We conclude that the performance of an ADC with at least 5 bits of resolution is pretty reasonable and that this reduction in the number of bits, in comparison to 8-bit ADC, represents a fairly expressive energy saving.

Explore related subjects

eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Eder O. de Souza, João T. Dias, Demerson N. Gonçalves. 2023-11-09. Implementation and Performance Analysis of a Low Resolution OFDM System Prototype With Low Cost Hardware. https://doi.org/10.14209/jcis.2023.17

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗
arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗
arXiv2026

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP↗