Search arXivSearch

arXiv · 2303.13719

Implicit electric field Conjugation: Data-driven focal plane control

Abstract

Direct imaging of Earth-like planets is one of the main science cases for the next generation of extremely large telescopes. This is very challenging due to the star-planet contrast that must be overcome. Most current high-contrast imaging instruments are limited in sensitivity at small angular separations due to non-common path aberrations (NCPA). The NCPA leak through the coronagraph and create bright speckles that limit the on-sky contrast and therefore also the post-processed contrast. We aim to remove the NCPA by active focal plane wavefront control using a data-driven approach. We developed a new approach to dark hole creation and maintenance that does not require an instrument model. This new approach is called implicit Electric Field Conjugation (iEFC) and it can be empirically calibrated. This makes it robust for complex instruments where optical models might be difficult to realize. Numerical simulations have been used to explore the performance of iEFC for different coronagraphs. The method was validated on the internal source of the Magellan Adaptive Optics eXtreme (MagAO-X) instrument to demonstrate iEFC's performance on a real instrument. Numerical experiments demonstrate that iEFC can achieve deep contrast below $10^{-9}$ with several coronagraphs. The method is easily extended to broadband measurements and the simulations show that a bandwidth up to 40% can be handled without problems. Experiments with MagAO-X showed a contrast gain of a factor 10 in a broadband light and a factor 20 to 200 in narrowband light. A contrast of $5\cdot10^{-8}$ was achieved with the Phase Apodized Pupil Lyot Coronagraph at 7.5 $λ/D$. The new iEFC method has been demonstrated to work in numerical and lab experiments. It is a method that can be empirically calibrated and it can achieve deep contrast. This makes it a valuable approach for complex ground-based high-contrast imaging systems.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S. Y. Haffert, J. R. Males, K. Ahn, K. Van Gorkom, O. Guyon, L. M. Close, J. D. Long, A. D. Hedglen, L. Schatz, M. Kautz, J. Lumbres, A. Rodack, J. M. Knight, K. Miller. 2023-03-24. Implicit electric field Conjugation: Data-driven focal plane control. https://doi.org/10.1051/0004-6361%2F202244960

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM