Search arXiv⌕ Search

arXiv · 2306.16672

Towards understanding the performance of IEEE 802.11p MAC in heterogeneous traffic conditions

Abstract

Motivated by the need to study the performance of vehicular communication protocols as applicable to heterogeneous traffic conditions, we study the performance of IEEE 802.11p medium access protocol under such a traffic setup. We consider a setup comprising connected vehicles and human-driven Motorised Two Wheelers (MTWs), where the connected vehicles are required to move as platoon with a desired constant headway despite interruptions from the two wheelers. We invoke specific mobility models for the movement of the vehicles--car following models for connected vehicle platoons and gap-acceptance model to capture the movement of the MTWs--and use them to configure (i) the traffic setup and (ii) the rate at which data packets related to safety-critical messages need to be transmitted. A control-theoretic analysis of the car-following models yields a bound on the admissible communication delay to ensure non-oscillatory convergence of the platoon headway. We then use suitable Markov chain models to derive the distribution of the MAC access delay experienced by packets pertaining to safety-critical events as well as routine safety messages. The distribution along with the bound on the admissible delay enables us to derive the reliability of the 802.11p MAC protocol in terms of traffic and EDCA parameters. Our study highlights the need for redesign of MAC protocols for vehicular communications for safety-critical applications in heterogeneous conditions.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

MS Gayathree, Sreelakshmi Manjunath. 2023-12-12. Towards understanding the performance of IEEE 802.11p MAC in heterogeneous traffic conditions. https://arxiv.org/abs/2306.16672

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Secure Polarization-Shift Backscatter Identification Applied to Battery-Free BLE Sensors Powered by Wireless Power Transfer

This paper presents a lightweight and protocolindependent security mechanism for battery-free Bluetooth Low Energy (BLE) sensor nodes operating in Simultaneous Wireless Information and Power Transfer (SWIPT) architecture. The proposed approach exploits polarization-shift backscattering of the wireless power wave to transmit an encrypted device identification prior to data communication. A fail-safe RF switch and orthogonally polarized antennas are integrated as an external add-on module, enabling controlled backscatter without modifying the original energy-harvesting rectifier. The identification payload is encrypted using AES-128 and transmitted with minimal energy overhead. Experimental validation on a battery-free BLE sensor node demonstrates reliable extraction of the backscattered identification signal, seamless coexistence with BLE advertising, and improved RF-to-DC harvesting efficiency compared to rectifier-based backscatter solutions. The results confirm that polarization-shift backscatter identification provides an effective and practical security for battery-free BLE sensing systems.

cs.NI↗

From WPT to Encrypted Telemetry: A Battery-Free Backscattering-based Polarimetric Wireless Sensor

This work introduces an indoor Battery-Free Wireless Sensing Node powered through radiative Wireless Power Transfer (WPT). The proposed platform targets secure, energyefficient active sensing and overcomes key limitations of many prior battery-free approaches, which commonly provide neither on-node computation nor cryptographic protection. The node combines temperature, humidity, pressure and Volatile Organic Compound (VOC) measurements with a low-power microcontroller that executes sensor calibration, derives a VOC index, formats the payload, and applies AES-128 encryption before wireless transmission. Energy harvesting and communication are enabled by a 1-bit controlled Backscatter Rectenna (BR), which both scavenges incident RF power and produces an orthogonally polarized backscattered signal for robust polarimetric operation. Experimental results validate reliable multi-sensor readout and encrypted data transfer, while maintaining a very low energy budget for the complete sense-compute-encrypt-transmit cycle.

cs.NI↗

NebulaSD: Many-for-Many Speculative Decoding

Speculative decoding accelerates Large Language Model (LLM) inference by using a lightweight draft model to propose candidate tokens for parallel verification by a target model. Drafting and verification, however, exhibit different service characteristics and favor different batch configurations, making fixed draft-target coupling inefficient under concurrent workloads. Existing distributed designs can physically separate the two stages, but often retain request or batch affinities that prevent their capacities from being shared globally. We present NebulaSD, a many-for-many, or M-for-N, speculative decoding system that organizes draft and target workers into independently schedulable resource pools and dynamically reconstructs stage-specific batches from shared request pools. Such dynamic reassignment removes fixed worker locality, requiring request states to be made available at newly selected workers without introducing migration stalls. NebulaSD addresses this challenge through worker-triggered batch reconstruction and asynchronous KV-state preparation overlapped with model execution. We evaluate NebulaSD from both system and scaling perspectives, showing that dynamic pooling improves request-round processing rate by 50.4% over a physically disaggregated baseline and 72.6% over co-located execution on a four-GPU deployment while substantially increasing effective GPU utilization. Profile-driven simulations further show approximately proportional compute-side capacity scaling under idealized state movement.

cs.NI↗