Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2307.09094

Improved RF Performance of Niobium Cavities via In-situ Vacuum Heat Treatment Technique

Yegor Tamashevich·Alena Prudnikava·Alexander Matveenko·Axel Neumann·Oliver Kugeler·Jens Knobloch
View original source ↗Read source document ↗Export metadata ↓

Abstract

Vacuum thermal treatments (baking) are known to improve the superconducting properties of the RF surface layer of niobium cavities, and are employed as a last processing step to increase their efficiency determined by intrinsic quality factor Q0. A new method to perform the baking has been demonstrated. It consists in annealing of an evacuated cavity with the local heaters installed on its outer surface in a cryostat which ensures an exterior vacuum and protects the outer cavity surface from oxidation. Such a set-up has a number of advantages as it does not require to cool the cavity flanges during baking, and allows to perform the "cold" RF characterization of the cavity in situ, immediately after the thermal treatment without disassembly of heating elements. Moreover, the air exposure that causes partial degradation of Q0 by surface reoxidation is avoided. The heat treatment of a single-cell 1.3 GHz niobium cavity at 230 °C for 24 h demonstrated the doubling of Q0 at Eacc=10 MV/m (from 1.20e10 to 2.4e10) and retained the maximal accelerating field of 35 MV/m without quenching. The selection of treatment parameters is based on our previous XPS studies. This treatment ensures incomplete dissolution of the native oxide by oxygen diffusion, thereby preventing interaction of niobium surface with external contaminants. We propose to bake the cavities directly in a cryomodule, which would allow to use the treatment to improve their performance. The potential impact of material parameters on the components of surface resistance has been briefly examined.

Explore related subjects

physics.acc-phcond-mat.supr-con

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yegor Tamashevich, Alena Prudnikava, Alexander Matveenko, Axel Neumann, Oliver Kugeler, Jens Knobloch. 2024-12-24. Improved RF Performance of Niobium Cavities via In-situ Vacuum Heat Treatment Technique. https://arxiv.org/abs/2307.09094

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-power attosecond X-ray free-electron lasers: physics and design strategy

Attosecond pulses from X-ray free-electron laser (XFEL) have opened new opportunities for probing ultrafast electronic dynamics on the Angstrom--attosecond spatiotemporal scale. Most attosecond XFEL concepts rely on generating an ultrashort high-current spike through either external laser modulation or accelerator-based beam manipulation. Despite their different implementations, these approaches share the same essential physics, namely that the XFEL amplification is confined to a short effective lasing window within the electron beam. However, existing studies are often scheme-specific and do not yet provide a unified quantitative picture of how fundamental electron-beam properties constrain high-power attosecond performance. In this work, we investigate the general physics and scheme-independent requirements for generating high-power attosecond X-ray pulses from a short current spike. From the perspective of post-saturation superradiant evolution, we show that the effective lasing length of the electron beam governs both the attainable peak power and the pulse duration. We further examine the distinct roles of slice energy spread, slice emittance, energy chirp, undulator tapering, and transverse beam tilt. Our results reveal the trade-off between peak power, pulse shortening, and single-spike probability, and provide facility-independent guidelines for optimizing electron-beam phase-space manipulation toward terawatt-class attosecond XFEL operation.

physics.acc-ph↗
arXiv2026

Bayesian Optimization of The Relativistic Heavy Ion Collider Luminosity via $s^*$ Control

Maximizing luminosity at the interaction point (IP) requires the collision location $s_{IP}$ to coincide with the longitudinal position of the minimum beta function, $s^$. Accurate optics measurements and control of $s^$ are therefore essential for luminosity optimization. At the Relativistic Heavy Ion Collider (RHIC), average horizontal beta-beat measurements between operating IPs are approximately $20%$, with significant variation in measured $s^*$. Precise control of the beam waist position $s^$ is particularly challenging for modern high-energy colliders with short bunch lengths and large crossing angles. We present an online Bayesian optimization (BO) application using the GPTune framework to optimize sPHENIX luminosity through $s^$ control at RHIC. GPTune was first validated at the RHIC Electron Beam Ion Source (EBIS), where it achieved up to a $70%$ increase in beam intensity over the baseline, although experienced operators could reach similar performance with longer manual tuning. The framework was subsequently deployed during sPHENIX operations. Using an intensity-normalized Zero-Degree Calorimeter (ZDC) signal as the optimization objective, due to the unavailability of the live sPHENIX MVTX signal, GPTune identified local luminosity maxima, recovered from intentionally degraded $s^$ configurations, and revealed residual horizontal and vertical waist offsets in the interaction region. These results demonstrate the robustness and efficiency of Bayesian optimization for real-time collider tuning under noisy, time-varying conditions. The $s^$ control methodology provides a promising tool for precision luminosity optimization and is particularly relevant to next-generation short-bunch colliders such as the Electron-Ion Collider (EIC).

physics.acc-ph↗
arXiv2026

Ultralow Mean Transverse Energy and High Quantum Efficiency Cryogenic Bialkali Photocathode for MHz-Repetition-Rate Electron Sources

Simultaneously achieving high quantum efficiency (QE), ultralow mean transverse energy (MTE), and robust long-term operation under conditions relevant to continuous-wave (CW) X-ray free-electron lasers (XFELs) remains a central challenge for semiconductor photocathodes. This challenge arises from the trade-off between QE and MTE, as well as the difficulty of maintaining stable operation in high-field CW electron guns. Here we demonstrate a cryogenic K2CsSb photocathode that simultaneously achieves high QE, ultralow MTE, and robust long-term operation in a CW gun under XFEL-relevant operating conditions. Under cryogenic operation, the photocathode achieves an MTE of 50 meV while sustaining a QE of 5.4%. Milliampere-level CW current, including operation at 5 mA, was demonstrated together with an approximately 20-day operational history. The observations are consistent with improved carrier survival and/or surface escape in photocathodes prepared using the optimized recipe. These results show that the practical QE-MTE trade-off can be substantially mitigated in cryogenic bialkali photocathodes and provide a practical pathway toward high-brightness electron sources for CW XFELs and energy-recovery linacs.

physics.acc-ph↗