Search arXivSearch

arXiv · 2309.02966

Analysis Methods for Gamma-ray Astronomy

Abstract

The launch of the Fermi satellite in 2008, with its Large Area Telescope (LAT) on board, has opened a new era for the study of gamma-ray sources at GeV ($10^9$ eV) energies. Similarly, the commissioning of the third generation of imaging atmospheric Cherenkov telescopes (IACTs) - H.E.S.S., MAGIC, and VERITAS - in the mid-2000's has firmly established the field of TeV ($10^{12}$ eV) gamma-ray astronomy. Together, these instruments have revolutionised our understanding of the high-energy gamma-ray sky, and they continue to provide access to it over more than six decades in energy. In recent years, the ground-level particle detector arrays HAWC, Tibet, and LHAASO have opened a new window to gamma rays of the highest energies, beyond 100 TeV. Soon, next-generation facilities such as CTA and SWGO will provide even better sensitivity, thus promising a bright future for the field. In this chapter, we provide a brief overview of methods commonly employed for the analysis of gamma-ray data, focusing on those used for Fermi-LAT and IACT observations. We describe the standard data formats, explain event reconstruction and selection algorithms, and cover in detail high-level analysis approaches for imaging and extraction of spectra, including aperture photometry as well as advanced likelihood techniques.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Denys Malyshev, Lars Mohrmann. 2023-09-06. Analysis Methods for Gamma-ray Astronomy. https://doi.org/10.1007/978-981-16-4544-0_177-1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM