Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2311.10951

Detecting Cosmic 21 cm Global Signal Using an Improved Polynomial Fitting Algorithm

Tianyang Liu·Junhua Gu·Quan Guo·Huanyuan Shan·Qian Zheng·Jingying Wang
View original source ↗Read source document ↗Export metadata ↓

Abstract

Detecting the cosmic 21 cm signal from Epoch of Reionization (EoR) has always been a difficult task. Although the Galactic foreground can be regarded as a smooth power-law spectrum, due to the chromaticity of the antenna, additional structure will be introduced into the global spectrum, making the polynomial fitting algorithm perform poorly. In this paper, we introduce an improved polynomial fitting algorithm - the Vari-Zeroth-Order Polynomial (VZOP) fitting and use it to fit the simulation data. This algorithm is developed for the upcoming Low-frequency Anechoic Chamber Experiment (LACE), yet it is a general method suitable for application in any single antenna-based global 21 cm signal experiment. VZOP defines a 24-hour averaged beam model that brings information about the antenna beam into the polynomial model. Assuming that the beam can be measured, VZOP can successfully recover the 21 cm absorption feature, even if the beam is extremely frequency-dependent. In real observations, due to various systematics, the corrected measured beam contains residual errors that are not completely random. Assuming the errors are frequency-dependent, VZOP is capable of recovering the 21 cm absorption feature even when the error reaches 10%. Even in the most extreme scenario where the errors are completely random, VZOP can at least give a fitting result that is not worse than the common polynomial fitting. In conclusion, the fitting effect of VZOP depends on the structure of the error and the accuracy of the beam measurement.

Explore related subjects

astro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Tianyang Liu, Junhua Gu, Quan Guo, Huanyuan Shan, Qian Zheng, Jingying Wang. 2023-11-18. Detecting Cosmic 21 cm Global Signal Using an Improved Polynomial Fitting Algorithm. https://doi.org/10.1093/mnras%2Fstad3617

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM↗
arXiv2026

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM↗
arXiv2026

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM↗