Search arXivSearch

arXiv · 2312.07957

Scintillation characteristics of an undoped CsI crystal at low-temperature for dark matter search

Abstract

The scintillation characteristics of 1 g undoped CsI crystal were studied by directly coupling two silicon photomultipliers(SiPMs) over a temperature range from room temperature to 86 K. The scintillation decay time and light output were measured using x-ray and gamma-ray peaks from a 109Cd radioactive source. An increase in decay time was observed as the temperature decreased from room temperature to 86 K, ranging from 76 ns to 605 ns. The light output also increased, reaching 26.2 +/- 1.3 photoelectrons per keV electron-equivalent at 86 K. Leveraging the significantly enhanced scintillation light output of the undoped CsI crystal at low temperatures, coupling it with SiPMs results in a promising detector for rare event searches. Both cesium and iodine have an odd number of protons, making them suitable targets for probing dark matter-proton spin-dependent interactions. This study evaluates the sensitivity of the proposed detector to such interactions, incorporating the Migdal effect and assuming 200 kg of undoped CsI crystals for dark matter searches. The results indicate that undoped CsI coupled with SiPM can achieve world-competitive sensitivity for low-mass dark matter detection, particularly in the context of dark matter-proton spin-dependent interactions.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W. K. Kim, H. Y. Lee, K. W. Kim, Y. J. Ko, J. A. Jeon, H. J. Kim, H. S. Lee. 2025-07-31. Scintillation characteristics of an undoped CsI crystal at low-temperature for dark matter search. https://doi.org/10.1016/j.astropartphys.2025.103150

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det