Search arXivSearch

arXiv · 2312.14365

An ab-initio derivation to discuss the heterodyne versus direct detection decision problem for astronomical infrared interferometry

Abstract

A consistent and explicit spectral comparison between heterodyne (HD) and direct detection (DD) derived from first principles including the atmospheric transmission and low beam-filling factors could not be found yet in literature but is needed for decisions in technology planification for future infrared interferometry facilities which are e.g. focused on planet formation. This task requires both, high sensitivity continuum and Doppler-resolved emission and absorption line detection in the mid-IR range (N- and Q-bands) at lower source temperatures (300-1000 K). The signal-to-noise ratios (SNRs) are derived for both schemes within the same semi-classical theory, which consists of classical mode theory for coupling to an antenna and occupation of these modes by quanta of three radiation fields, the thermal signal, the thermal background, and for HD also the coherent local oscillator (LO). The effects of very small beam filling factors (interferometry) and atmospheric absorption/emission could be consistently incorporated this way, as well as quantum-noise propagation which allows in HD the consideration of balanced mixers with cross-correlation (CC). Especially, the transition from pre- to post-detection SNRs was considered meticulously. We do this all because the usually cited SNR-expressions were derived for a too simple and unrealistic case, and moreover contain some wrong assumptions. We introduce a novel HD scheme for astronomical interferometry gaining an order of magnitude in sensitivity against conventional HD and calculate that it should trespass the sensitivity of DD interferometry in the N- and Q-bands for a spectral resolution of R=10000, and should do also for R=300 with doable technical improvements. This result encourages to develop broad-band heterodyne technologies for future mid-infrared interferometry facilities and for new instruments at existing facilities.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E. A. Michael, F. E. Besser, M. Hadjara, E. Moreno, A. Berdja, M. Pina, G. Pereira. 2023-12-22. An ab-initio derivation to discuss the heterodyne versus direct detection decision problem for astronomical infrared interferometry. https://arxiv.org/abs/2312.14365

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det