Search arXivSearch

arXiv · 2401.00328

LIPSS pattern induced by polymer surface instability for myoblast cell guidance

Abstract

The presented study highlights the efficiency of employing a KrF excimer laser to create diverse types of periodic nanostructures (LIPSS - laser induced periodic surface structures) on polyether ether ketone (PEEK) and polyethylene naphthalate (PEN) substrates. By exposing the polymer films below their ablation threshold to laser fluence ranging from 4 to 16 mJcm-2 at 6,000 pulses, we studied both single-phase exposure at beam incidence angles of 0deg and 45deg, and two-phase exposure. Atomic force microscopy analysis revealed that the laser-treated samples contained distinctive periodic patterns such as waves, globules, and pod-like structures each exhibiting unique surface roughness. Moreover, using analytical methods like EDS and XPS shed light on the changes in the atomic composition, specifically focusing on the C and O elements, as a result of laser exposure. Notably, in almost all cases, we observed an increase in oxygen percentage on the sample surfaces. This increase not only led to a decrease in the contact angle with water but also lowered the zeta potential value, thus showing that the modified samples have enhanced hydrophilicity of the surface and altered electrostatic properties. Last but not least, the samples were assessed for biocompatibility; we studied the interaction of the prepared replicates with mouse myoblasts (C2C12). The impact of globular/dot structures on the cell growth in comparison to pristine or linear LIPSS-patterned surfaces was determined. The linear pattern (LIPSS) induced the myoblast cell alignment along the pattern direction, while dot/globular pattern even enhanced the cytocompatibility compared to LIPSS samples.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Nikola Slepickova Kasalkova, Veronika Juricova, Silvie Rimpelova, Dominik Fajstavr, Bara Frydlova, Zdenka Kolska, Vaclav Svorcik, Petr Slepicka. 2023-12-30. LIPSS pattern induced by polymer surface instability for myoblast cell guidance. https://arxiv.org/abs/2401.00328

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph