Search arXivSearch

arXiv · 2402.04363

The Padul normal fault activity constrained by GPS data: Brittle extension orthogonal to folding in the central Betic Cordillera

Abstract

The Padul Fault is located in the Central Betic Cordillera, formed in the framework of the NW-SE Eurasian-African plate convergence. In the Internal Zone, large E-W to NE-SW folds of western Sierra Nevada accommodated the greatest NW-SE shortening and uplift of the cordillera. However, GPS networks reveal a present-day dominant E-W to NE-SW extensional setting at surface. The Padul Fault is the most relevant and best exposed active normal fault that accommodates most of the NE-SW extension of the Central Betics. This WSW-wards dipping fault, formed by several segments of up to 7 km maximum length, favored the uplift of the Sierra Nevada footwall away from the Padul graben hanging wall. A non-permanent GPS network installed in 1999 constrains an average horizontal extensional rate of 0.5 mm/yr in N66°E direction. The fault length suggests that a (maximum) 6 magnitude earthquake may be expected, but the absence of instrumental or historical seismic events would indicate that fault activity occurs at least partially by creep. Striae on fault surfaces evidence normal-sinistral kinematics, suggesting that the Padul Fault may have been a main transfer fault of the westernmost end of the Sierra Nevada antiform. Nevertheless, GPS results evidence: (1) shortening in the Sierra Nevada antiform is in its latest stages, and (2) the present-day fault shows normal with minor oblique dextral displacements. The recent change in Padul fault kinematics will be related to the present-day dominance of the ENE-WSW regional extension versus ~ NNW-SSE shortening that produced the uplift and northwestwards displacement of Sierra Nevada antiform. This region illustrates the importance of heterogeneous brittle extensional tectonics in the latest uplift stages of compressional orogens, as well as the interaction of folding during the development of faults at shallow crustal levels.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A. J. Gil, J. Galindo-Zaldívar, C. Sanz de Galdeano, M. J. Borque-Arancón, A. Sánchez-Alzola, M. Martínez-Martos, P. Alfaro. 2024-02-06. The Padul normal fault activity constrained by GPS data: Brittle extension orthogonal to folding in the central Betic Cordillera. https://doi.org/10.1016/j.tecto.2017.05.008

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Direction-Aware Masked Pretraining for 3D Seismic Representation Learning and Transfer to Cross-Area Acoustic Impedance Inversion

Large archives of unlabeled three-dimensional seismic data offer opportunities for self-supervised representation learning and subsequent transfer to acoustic impedance inversion. However, conventional masked pretraining often treats three axes equivalently, overlooking differences between lateral reflector structure and vertical waveform characteristics. We propose a direction-aware masked autoencoder for three-dimensional post-stack seismic data, combining anisotropic tokenization, direction-aware representation, trace-aligned tube masking, and reconstruction constraints designed for reflector continuity and waveform characteristics. We evaluate reconstruction quality and downstream transferability using field data through masked reconstruction and cross-area acoustic impedance inversion. Reconstruction is more sensitive to lateral token resolution than to moderate changes in vertical patch length. Within the evaluated configurations, increasing encoder capacity does not fully compensate for reconstruction fidelity loss associated with coarser tokenization. Preferred token scales and masking strategies differ between reconstruction and inversion, indicating that reconstruction fidelity alone is not a reliable indicator of transferability. For cross-area inversion, the pretrained model is fine-tuned in the source area and applied to the target area without further parameter updates. With limited target-area well control, the proposed framework reduces normalized root-mean-square error by 20.8% relative to a pretrained conventional masked autoencoder across eight target-area test wells under matched tokenization and downstream settings. These results demonstrate the value of direction-aware masked pretraining for field seismic inversion and show that token scale and masking strategy should be selected according to downstream-task requirements rather than reconstruction accuracy alone.

physics.geo-ph

Predicting the Elastic Properties of a Cemented Granular Material during Chemical Damage (Debonding)

While underground reservoirs emerge as essential elements to face global warming, these systems represent complex multi-physical and multiscale problems. The considered injection of fluids during hydrogen storage, carbon dioxide sequestration, or geothermal energy recovery involves a modification of the chemical equilibrium of the fluid in the porous reservoir. Chemical reactions can induce microstructural changes of the rock matrix, leading to a reduction of elastic properties of the material, and to potential settlement or stress redistribution. Consequently, it becomes pivotal to establish predictive behavior laws to describe the effect of chemical damage on elastic properties. Facing the difficulties to estimate experimentally the impact of chemical damage on mechanical properties, a Digital Rock Physics approach is proposed in this contribution. This numerical homogenization scheme is used to compare two distinct types of microstructure models: the first one consists in a Discrete Element Model, while the second one employs a continuous description. This continuous formulation is based on a Phase-Field description to predict the evolution of the microstructure subjected to chemical alterations and on the Fast Fourier Transform to estimate the macroscopic properties of the material. Finally, these frameworks establish different softening laws that can be used as constitutive ingredients for a cemented material during its weathering.

physics.geo-ph

Determination of Physical Height Differences from Time Transfer via the ACES Mission -- A Simulation Study

The determination of physical height differences using highly stable atomic clocks has emerged as a novel approach in relativistic geodesy, exploiting the gravitational redshift as a direct observable of geopotential differences. In this study, we investigate the feasibility of satellite-based clock comparisons using the Atomic Clock Ensemble in Space (ACES) onboard the International Space Station, which enables time transfer via microwave (MWL) and optical (ELT) links. Since operational optical data are not yet available, a comprehensive full-scale simulation of realistic ACES observation scenarios is performed, including detailed noise models of clocks and links. A slope-based estimation method is applied to time series of clock comparisons in order to extract the relativistic redshift signal and derive height differences between the ground stations. The performance of the approach is evaluated for quasi-common view, non-common view, and split non-common view configurations, where the latter divides the observation period into shorter intervals. The results show that optical links enable faster convergence and can achieve height accuracies at the decimeter level within a few days and at the centimeter level over longer periods, while microwave links are more strongly affected by noise and bias contributions. Non-common view processing significantly increases observation availability with only minor loss in accuracy, and the split approach provides robust solutions for larger networks. These findings demonstrate the strong potential of satellite-based clock comparisons as a remote-sensing technique for determining physical height differences on a continental scale.

physics.geo-ph