Search arXivSearch

arXiv · 2403.09823

Multi-droplet combustion in the presence of homogeneous and heterogeneous atomizations

Abstract

The effects of heterogeneous and homogeneous atomizations on combustion dynamics and flame spread rates of multi-droplets are experimentally investigated. The utilized fuel is biodiesel, which is doped with graphene oxide and blended with ethanol. Stable fuel suspensions are prepared. Either one droplet is positioned at the intersection of two thin fibers or an array of three droplets are positioned along a horizontal line and at the intersections of fibers. Simultaneous and time-resolved flame chemiluminescence and shadowgraphy techniques are utilized for imaging the flame and droplets, respectively. It is observed that, for a single droplet combustion of biodiesel, relatively low frequency (about 10 Hz) dynamics appear in the second half of the droplet life-time, which is due to heterogeneous atomizations. Blending with ethanol leads to homogeneous atomizations with dynamics featuring frequencies smaller than 50 Hz and at the beginning of the droplet lifetime. It is reported that the homogeneous atomizations lead to at least three times larger root-mean-square oscillations of the flame chemiluminescence compared to that for heterogeneous atomizations. For all tested multi-droplet configurations, independent of the graphene oxide doping concentration and blending with ethanol, the most dominant frequency of flame chemiluminescence oscillations is about 10-15 Hz. It is observed that the heterogeneous atomizations lead to a flame spread rate of about 6-8 mm2/s, with largest values reported for doping with moderate concentration of graphene oxide. Compared to that for heterogeneous atomizations, the flame spread rate for homogeneous atomizations are significantly larger 10-40 mm2/s, are not sensitive to graphene oxide doping concentration, and feature a positive relation with the root-mean-square of the flame chemiluminescence oscillations.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sepehr Mosadegh, Sina Kheirkhah. 2024-03-14. Multi-droplet combustion in the presence of homogeneous and heterogeneous atomizations. https://arxiv.org/abs/2403.09823

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn