Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2403.11354

Kinetic inductance traveling wave amplifier designs for practical microwave readout applications

A. Giachero·M. Vissers·J. Wheeler·L. Howe·J. Gao·J. Austermann·J. Hubmayr·A. Nucciotti·J. Ullom
View original source ↗Read source document ↗Export metadata ↓

Abstract

A Kinetic Inductance Traveling Wave amplifier (KIT) utilizes the nonlinear kinetic inductance of superconducting films, particularly Niobium Titanium Nitride (NbTiN), for parametric amplification. These amplifiers achieve remarkable performance in terms of gain, bandwidth, compression power, and frequently approach the quantum limit for noise. However, most KIT demonstrations have been isolated from practical device readout systems. Using a KIT as the first amplifier in the readout chain of an unoptimized microwave SQUID multiplexer coupled to a transition-edge sensor microcalorimeter we see an initial improvement in the flux noise. One challenge in KIT integration is the considerable microwave pump power required to drive the non-linearity. To address this, we have initiated efforts to reduce the pump power by using thinner NbTiN films and an inverted microstrip transmission line design. In this article, we present the new transmission line design, fabrication procedure, and initial device characterization -- including gain and added noise. These devices exhibit over 10 dB of gain with a 3 dB bandwidth of approximately 5.5-7.25 GHz, a maximum practical gain of 12 dB and typical gain ripple under 4 dB peak-to-peak. We observe an appreciable impedance mismatch in the NbTiN transmission line, which is likely the source of the majority of the gain ripple. Finally we perform an initial noise characterization and demonstrate system-added noise of three quanta or less over nearly the entire 3 dB bandwidth.

Explore related subjects

quant-phcond-mat.supr-con

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A. Giachero, M. Vissers, J. Wheeler, L. Howe, J. Gao, J. Austermann, J. Hubmayr, A. Nucciotti, J. Ullom. 2024-12-13. Kinetic inductance traveling wave amplifier designs for practical microwave readout applications. https://doi.org/10.1007/s10909-024-03078-1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Fermionic magic resources in disordered quantum spin chains

Fermionic non-Gaussianity quantifies a quantum state's deviation from a classically tractable free-fermionic description, constituting a necessary resource for computational quantum advantage. Here we use fermionic antiflatness (FAF) to measure this deviation across ergodic and many-body localized (MBL) regimes. We focus on the paradigmatic disordered spin-$1\!/2$ XXZ chain and its impurity variant with local interactions. Across highly excited eigenstates, FAF evolves from typical-state behavior at weak disorder to strongly suppressed values deep in the MBL regime, with volume-law scaling in the XXZ chain and an area-law bound in the impurity setting. Rare long-range cat-like eigenstates exhibit a pronounced enhancement of FAF, making it a sensitive diagnostic of mechanisms proposed to destabilize MBL. Starting from product states, we find that in the MBL regime FAF grows slowly in time, approaching saturation via a power-law relaxation. Overall, our results show that MBL suppresses fermionic non-Gaussianity, and the associated complexity beyond free fermions, while ergodicity restores it, motivating explorations of fermionic non-Gaussianity in other ergodicity-breaking phenomena.

quant-ph↗
arXiv2026

Progressive Binarization - Pauli Correlation Encoding: a Continuation Method for Constrained Optimization

Pauli Correlation Encoding (PCE) reduces the qubit requirements of quantum optimization by embedding the problem variables into the expectation values of Pauli observables, so that the number of qubits can be much smaller than the number of variables. PCE has not yet been studied for constrained optimization. We extend it to constrained combinatorial problems, using the budget-constrained MinCut as a case study, and show that the standard formulation fails to reliably enforce the constraint: feasibility hinges on the binarization of the encoded variables, which depends sensitively on hyperparameters that are hard to tune and do not transfer across instances. To address this, we introduce Progressive-Binarization PCE (PB-PCE), an adaptive continuation scheme that progressively increases the binarization parameter while re-optimizing the circuit from the previous solution, driving the variables towards the binary domain. PB-PCE attains near-complete constraint satisfaction (88--100\%) and smaller cut sizes than standard PCE, with a number of stages (10--20) essentially independent of problem size, solving instances of up to 300 variables with only 9-qubit circuits.

quant-ph↗
arXiv2026

A quantum model for synchronizing finite state transition systems

We propose a quantum model for finding a resetting input sequence (RS) which can take a finite state transition system (FA), to particular state independent of its current state. The complexity of finding such sequences for various types of FA can be NP-Hard or even PSPACE-Complete. To this end, we represent the FA states, inputs, and transition function in quantum space. Accordingly, we propose a model to represent the execution of an input sequence of a particular length $l$ starting form an initial FA state. The model is extended considering the application in superposition of all input sequences of length $l$ to an initial state of the FA. The model is further extended considering the application of all input sequences to all initial states of the FA capturing for every input sequence the collection (ordered list) of states reached by applying the sequence to all states of the FA. The amplitude amplification algorithm is then used as it combines similar collections of reached states while preserving all input sequences that reach these collections. A Grover search for a reached collection where its elements correspond to the same FA state provides a RS for the FA. Our approach offers a quadratic gain over the exponential complexity of traditional brute-force method, which is the only method that can be applied to a general FA class.

quant-ph↗