Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2406.07910

Demonstration of Safe Electromagnetic Radiation Emitted by 5G Active Antenna Systems

Sumit Kumar·Chandan Kumar Sheemar·Abdelrahman Astro·Jorge Querol·Symeon Chatzinotas
View original source ↗Read source document ↗Export metadata ↓

Abstract

The careful planning and safe deployment of 5G technologies will bring enormous benefits to society and the economy. Higher frequency, beamforming, and small-cells are key technologies that will provide unmatched throughput and seamless connectivity to 5G users. Superficial knowledge of these technologies has raised concerns among the general public about the harmful effects of radiation. Several standardization bodies are active to put limits on the emissions which are based on a defined set of radiation measurement methodologies. However, due to the peculiarity of 5G such as dynamicity of the beams, network densification, Time Division Duplexing mode of operation, etc, using existing EMF measurement methods may provide inaccurate results. In this context, we discuss our experimental studies aimed towards the measurement of radiation caused by beam-based transmissions from a 5G base station equipped with an Active Antenna System(AAS). We elaborate on the shortcomings of current measurement methodologies and address several open questions. Next, we demonstrate that using user-specific downlink beamforming, not only better performance is achieved compared to non-beamformed downlink, but also the radiation in the vicinity of the intended user is significantly decreased. Further, we show that under weak reception conditions, an uplink transmission can cause significantly high radiation in the vicinity of the user equipment. We believe that our work will help in clearing several misleading concepts about the 5G EMF radiation effects. We conclude the work by providing guidelines to improve the methodology of EMF measurement by considering the spatiotemporal dynamicity of the 5G transmission.

Explore related subjects

cs.ETcs.NIeess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sumit Kumar, Chandan Kumar Sheemar, Abdelrahman Astro, Jorge Querol, Symeon Chatzinotas. 2024-06-12. Demonstration of Safe Electromagnetic Radiation Emitted by 5G Active Antenna Systems. https://arxiv.org/abs/2406.07910

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Whole-Blood Boundary Analysis of BioFET-Based ctDNA Detection for Intravascular Sensing in Intrabody Nanonetworks

Liquid biopsy can detect tumor-derived biomarkers such as circulating tumor DNA (ctDNA), but ultra-low-fraction assays remain costly, slow, and difficult to scale. This motivates interest in intravascular in vivo sensing in the context of intrabody nanonetworks, where nanosensors could support local biomarker monitoring. BioFET-based nanosensors are relevant here because they are label-free, highly miniaturizable, and have shown strong ctDNA sensitivity in controlled media. We examine whether this sensitivity still yields reliable ctDNA detection in whole blood using a reduced-order stochastic simulation model that links operating-point selection, Debye-screened charge transduction, stochastic finite-capacity binding, nonspecific adsorption, background fluctuations, and intrinsic electronic noise to blank-threshold detection. Monte Carlo evaluation with physiologically grounded parameters shows that short Debye length and several-nanometer charge-to-channel separation attenuate the current shift, while low-frequency noise and background fluctuations reduce the margin between target-present and blank responses. Under the tested quasi-static charge-gating regime, the simulated current shifts do not reliably exceed the blank-derived threshold at low ctDNA concentrations. The model therefore provides a whole-blood boundary analysis that identifies which interface configurations and operating conditions most strongly limit reliable BioFET-based intravascular ctDNA detection.

cs.ET↗
arXiv2026

Beyond HBM-on-GPU: Thermal Design Envelope for 3D Volumetric DRAM-on-GPU Integration

The scaling of GPUs for AI and HPC workloads is increasingly constrained by the capacity, bandwidth, and thermal limits of both 2.5D HBM-GPU and direct-stacked 3D HBM-on-GPU integration. This work establishes the thermal design envelope for 3D volumetric DRAM-on-GPU integration, in which vertically oriented DRAM dies and interleaved cooling cavities reshape heat flow and memory interfacing above the GPU. Using a package-level thermal model anchored to a consistent HBM-on-GPU baseline and driven by a realistic reticle-scale non-uniform GPU power map, we quantify the key parameters governing thermal feasibility. Stack height is the dominant limiter of peak temperature, while cooling-cavity conductivity shifts the feasible region, and mold insertion and stack orientation further modulate thermal behavior. A distributed memory-controller and network-on-chip tier introduces only a moderate thermal penalty. Although die-level parallelism increases bandwidth, the reduction in simulated training time saturates once execution becomes compute-bound. These results define a bounded co-design space across bandwidth, capacity, and thermal constraints for 3D volumetric DRAM-on-GPU integration.

cs.ET↗
arXiv2026

Droop-Aware Foundation Model Power Flow

This paper develops a droop-aware extension of the GridFM power systems foundation model, embedding droop gains and frequency/voltage deadband parameters as per-bus node features to enable control-aware AC power-flow analysis. Existing power-flow datasets encode only static electrical features, conflating operating points from qualitatively different control regimes; this work resolves that gap by exposing droop and deadband parameters as structured node features, with deadband discontinuities handled through a smooth tanh approximation that preserves solver differentiability. A transformer-based graph neural network is pre-trained on masked reconstruction and fine-tuned on the resulting control-aware datasets. The framework is validated against PSCAD electromagnetic-transient simulations on a two-bus system (0.11% maximum steady-state error) and cross-validated against an independent PyPower droop solver on the IEEE 24-bus RTS. On the 24-bus system the surrogate attains R2 = 0.9996 for active generation and 0.0015 p.u. voltage-magnitude RMSE; scalability is confirmed on the IEEE 300-bus system (0.0036 p.u. RMSE, R2 = 0.9841 for voltage magnitude across 299,700 predictions). A three-mode control study further shows that the deadband widens the control-error distribution while leaving total droop compensation unchanged, establishing deadband width as an actionable node-level design feature.

cs.ET↗