Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2407.16543

Joint Active and Passive Beamforming Design for IRS-aided MIMO ISAC Based on Sensing Mutual Information

Jin Li·Gui Zhou·Tantao Gong·Nan Liu·Rui Zhang
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this paper, we investigate the intelligent reflecting surface (IRS)/reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system based on sensing mutual information (MI). Specifically, the base station (BS) perceives the sensing target via the reflected sensing signal by the IRS, while communicating with the users simultaneously. Our aim is to maximize the sensing MI, subject to the quality of service (QoS) constraints for all communication users, the transmit power constraint at the BS, and the unit-modulus constraint on the IRS's passive reflection. We solve this problem under two cases: one simplified case assuming a line-of-sight (LoS) channel between the BS and IRS and no clutter interference to sensing, and the other generalized case considering the Rician fading channel of the BS-IRS link and the presence of clutter interference to sensing. For the first case, we prove that the dedicated sensing beamformer is unnecessary for improving sensing MI and develop a low-complexity iterative algorithm to jointly optimize the BS and IRS active/passive beamformers. Then, for the second case, we propose an alternative iterative algorithm, which can also be applied to the first case, to solve the beamforming design problem under the general setup. Numerical results are provided to validate the performance of the proposed algorithms, as compared to various benchmark schemes.

Explore related subjects

eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jin Li, Gui Zhou, Tantao Gong, Nan Liu, Rui Zhang. 2025-04-02. Joint Active and Passive Beamforming Design for IRS-aided MIMO ISAC Based on Sensing Mutual Information. https://arxiv.org/abs/2407.16543

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗
arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗
arXiv2026

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP↗