Search arXivSearch

arXiv · 2408.00982

Adaptive optical signal-to-noise ratio recovery for long-distance optical fiber transmission

Abstract

In long-distance fiber optic transmission, the optic fiber link and erbium-doped fiber amplifiers can introduce excessive noise, which reduces the optical signal-to-noise ratio (OSNR). The narrow-band optical filters can be used to eliminate noise and thereby improve OSNR. However, there is a relative frequency drift between the signal and the narrow-band filter, which leads to filtered signal instability. This paper proposes an adaptive OSNR recovery scheme based on a Fabry-Perot (F-P) cavity with mode width of 6 MHz. Utilizing the comb filtering of F-P cavity, the noise around the carrier and sidebands of the signal is filtered out simultaneously. To avoid frequency mismatch, we propose a double-servo scheme to suppress relative frequency drift between the signal and the F-P cavity. We constructed a stable radio frequency transfer system based on passive phase compensation and compared our scheme with other OSNR recovery schemes based on optical filters. Compared to the schemes based on dense wavelength division multiplexing (DWDM) and Waveshaper, our scheme demonstrates an improvement in OSNR of carrier by at least 12 dB and sidebands by at least 23.5 dB. The short-term transfer stability (1 s) is improved by one order of magnitude compared to DWDM and half an order of magnitude compared to Waveshper. This scheme can be applied to the recovery of signals with low OSNR in long-distance fiber optic transmission, improving signal quaility and extending the transmission distance limit.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mingwen Zhu, Shangsu Ding, Zhixue Li, Song Yu, Jianming Shang, Bin Luo. 2024-08-02. Adaptive optical signal-to-noise ratio recovery for long-distance optical fiber transmission. https://arxiv.org/abs/2408.00982

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Exoplanet Detection Using Adaptive Quantum-Optimal Measurement

Detecting terrestrial exoplanets in the habitable zones of nearby stars remains a critical challenge. Such planets can be \(10^8\) to \(10^{10}\) times fainter than their host stars and lie at diffraction-limited angular separations, where starlight strongly obscures the companion signal. Here we present an adaptive quantum measurement method for estimating the number, positions, and brightnesses of mutually incoherent point sources in the sub-Rayleigh, ultra-high-contrast regime, operating at contrasts down to \(10^{-8}\) -- five orders of magnitude beyond previous quantum imaging approaches to exoplanet detection. The method adopts a spatial-mode basis that is updated to maximize the quantum Fisher information per detected photon. Estimation is performed by maximum likelihood in log-brightness coordinates, and the source count is determined by Bayesian-information-criterion (BIC) model selection directly from photon-count statistics, without a tunable detection threshold. For point sources within sub-Rayleigh separations and with brightness ratios spanning eight orders of magnitude, the method reconstructs complete scenes with a mean success rate of \(72.5\%\). Furthermore, it is robust to misalignment, maintaining a \(71.3\%\) success rate under offsets of up to six pixels. These results demonstrate that terrestrial exoplanets can be detected below the Rayleigh limit, a regime previously inaccessible to direct imaging.

physics.optics

Research and simulation of analytical polarization control enabled by optical computing on an integrated photonics chip

Dynamic polarization controllers are key devices with broad applications in many fields. However, most on-chip polarization controllers still rely on traditional blind-search methods, whereas analytical optical-computing approaches remain insufficiently explored, particularly with respect to calibration and endless polarization control. With the accurate relative phase of Mach-Zehnder interferometer (MZI) being fully controllable on an integrated photonics chip, we present an analytical polarization control (APC) method using four phase shifters and optical computing, eliminating the need for the traditional inefficient blind-search procedure. The basic structures and operations of APC are clarified. The proposed calibration method and endless control method enable continuous APC while compensating for phase differences within the MZI structures. We simulate the influence of the endless control unit on polarization control and quantify the effect of the fourth phase difference on the output extinction ratio. With the fourth phase shifter, the phase difference encountered during Stokes vector measurement can be effectively compensated, and rotations around all three axes on the Poincaré sphere can be realized. These results establish a practical APC architecture based on optical computing for photonics chips. The proposed APC methods, combined with a FPGA-based hardware acceleration, will enable high speed on-chip polarization controllers.

physics.optics

Optical Mode Sorting with a Programmable Diffractive Neural Network

Programmable diffractive optical processors are particularly attractive for spatial light manipulation because their optical transformations can be dynamically reconfigured and adapted without modifying the physical hardware. However, their practical performance is often limited by the gap between simulation and experiment caused by optical aberrations, alignment errors, and nonideal phase responses. In this paper, we introduce a hybrid optimization framework that combines high-dimensional numerical design with low-dimensional hardware-in-the-loop calibration, enabling programmable diffractive optical networks to compensate experimentally for mismatch without retraining their underlying optical transformations. We demonstrate a programmable optical diffractive neural network (ODNN) designed by back-propagation to spatially sort six linearly polarized modes supported by a multimode fiber. The experimental distortions are represented using a truncated Zernike basis with only 19 correction coefficients per layer. These coefficients are optimized directly on the physical system using stochastic parallel gradient descent, avoiding re-optimization of the full pixelated phase masks. Experimentally, the proposed calibration yields an SNR improvement of approximately 3.26 dB, and a decrease in amplitude error of 0.04. This separation of high-dimensional optical-function design from low-dimensional physical calibration provides a scalable route towards adaptive and reconfigurable spatial-mode processors for optical router on spatial modes and wavelengths, programmable photonic computer systems and quantum information processing.

physics.optics