Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2409.05522

Design and Implementation of TAO DAQ System

Shuihan Zhang·Chao Chen·Xiaolu Ji·Fei Li·Yu Peng·Fabrizio Petrucci·Yinhui Wu·Zezhong Yu·Tingxuan Zeng·Kejun Zhu
View original source ↗Read source document ↗Export metadata ↓

Abstract

Purpose: The Taishan Antineutrino Observatory (TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO), also known as JUNO-TAO. Located close to one of the reactors of the Taishan Nuclear Power Plant, TAO will measure the antineutrino energy spectrum precisely as a reference spectrum for JUNO. The data acquisition (DAQ) system is designed to acquire data from the TAO readout electronics and process it with software trigger and data compression algorithms. The data storage bandwidth is limited by the onsite network to be less than 100 Mb/s. Methods: The system is designed based on a distributed architecture, with fully decoupled modules to facilitate customized design and implementation. It is divided into two main components: the data flow system and the online software. The online software serves as the foundation, providing the electronics configuration, the process management, the run control, and the information sharing. The data flow system facilitates continuous data acquisition from various electronic boards or trigger systems, assembles and processes raw data, and ultimately stores it on the disk. Results: The core functionality of the system has been designed and developed. The usability of the data flow system interface and the software trigger results have been verified during the pre-installation testing phase. Conclusion: The DAQ system has been deployed for the TAO experiment. It has also successfully been applied to the integration test of the detector and electronics prototypes.

Explore related subjects

physics.ins-detcs.SYeess.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Shuihan Zhang, Chao Chen, Xiaolu Ji, Fei Li, Yu Peng, Fabrizio Petrucci, Yinhui Wu, Zezhong Yu, Tingxuan Zeng, Kejun Zhu. 2024-09-09. Design and Implementation of TAO DAQ System. https://arxiv.org/abs/2409.05522

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Mortality of ultra-thin LGADs and PiN diodes from high energy deposition

Low Gain Avalanche Diodes are prime candidates for high-resolution timing applications in High Energy Physics, Nuclear science, and several other fields. Operating these devices in high-radiation environments presents various hazards, including the risk of their permanent degradation or destruction caused by effects such as Single Event Burnout. Studies using minimum ionizing particles found a greatly reduced Single Event Burnout risk by operating below a bias voltage corresponding to an average electric field of 12 V/$μ$m - however, as high energy particle colliders produce a wide energy spectrum of radiation, it is crucial to understand this phenomenon and other possible damage mechanisms at energy deposition levels greater than those of minimum ionizing particles. This was achieved by pre-irradiating LGADs and PiN diodes with active thicknesses of 20, 30, and 50 $μ$m up to 1.5 $\times$ 10$^{15}$ $\mathrm{n_{eq}/cm^2}$, and exposing them to beams of protons and heavy ions (C, O, Fe, Au) at the BNL Tandem van de Graaff accelerator. Several mortality categories were observed, defined by different electrical and mechanical damage signatures. This furthers our understanding of permanent radiation damage of silicon devices, crucial towards mitigating Single Event Burnout and other damage mechanisms to safely operate future detectors.

physics.ins-det↗
arXiv2026

Small but Tubby: A Magnetic Loop Antenna Made from 100 mm Copper Tubing

This paper presents the electrical model, key equations, and practical construction of a small transmitting magnetic loop antenna built from unusually large 100 mm diameter copper tubing. The large conductor surface area and wide-area transitions to the vacuum capacitors were designed to minimize resistive losses. The frequency range from 1.8 MHz to 31 MHz is unusually wide. Frequency, impedance matching, and azimuth are all adjusted automatically by servo motors. Indoor losses originate predominantly from near-field coupling to the environment rather than from the antenna itself. Temperature-rise measurements confirm that the bulk of the dissipated power is absorbed by the environment, not by the antenna components. The conducted H-field measurements demonstrate good agreement between the measured H-field and the theoretical free-space H-field calculated from the antenna geometry and an estimated loop current. The loop current was estimated from the measured antenna bandwidth and the applied transmit power. The antenna was developed for indoor operation where outdoor installation is not possible.

physics.ins-det↗
arXiv2026

Construction and characterisation of the DarkSide-20k veto silicon photo-multiplier tiles

Silicon photo-multipliers (SiPMs) are state-of-the-art sensors capable of detecting a single photoelectron under cryogenic conditions, with potentially lower radioactivity than widely used photomultiplier tubes. The DarkSide-20k experiment, designed to perform direct dark matter searches using liquid argon as the target material, employs SiPM technology to detect interactions in the active detector volumes, including the central dual-phase Time Projection Chamber and the Inner and Outer Veto volumes. The vetoes are designed to discriminate against radiogenic neutron and cosmic muon backgrounds associated with the dark matter search. This paper describes the completed production and test protocols for the "Veto Tiles" (called vTiles, arrays of 24 SiPMs integrated on a printed circuit board providing the power distribution and signal amplification); 16 vTiles are grouped into "Veto Photo-Detector Units" to instrument the Inner Veto volume. Each vTile underwent detailed testing at room and cryogenic temperatures, confirming stable operation, high signal-to-noise ratio, and low radioactive contamination, demonstrating the robustness of the proposed design for cryogenic conditions. The final production yield exceeded 87%, surpassing the 80% requirement and corresponding to 1920 Veto Tiles to populate 120 Veto Photo-Detector Units, plus an additional 6% as spares.

physics.ins-det↗