Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2409.08203

Study of energy deposition in the coolant of LFR

Maria Susini·Sacha Barré·Daniele Tomatis·Stefano Argirò
View original source ↗Read source document ↗Export metadata ↓

Abstract

The determination of the fraction of energy deposited in the coolant is required for the setup of accurate thermal-hydraulic calculations in reactor core analysis. This study focuses on assessing this fraction and analysing the neutronic and photonic processes contributing to energy deposition in Lead-cooled Fast Reactors (LFRs). Using OpenMC, coupled neutron-photon transport calculations were performed within a fuel pin cell geometry, representative of the one under development at \textsl{new}cleo. Additionally, the implementation of lattice geometry was tested to gauge the impact of reflective boundary conditions on computational efficiency. In the context of a surface-based algorithm, the pin geometry has proven to be computationally more cost-effective. The fraction of energy deposited in the LFR coolant was evaluated at $\sim5.6$\%, surpassing that of pressurised water Reactors ($\lessapprox 3\%$), with photon interactions emerging as the principal contributor. The influence of bremsstrahlung radiation was also considered, revealing minor impact compared to other photonic processes. Given the continuous exploration of various core designs and the expectation of diverse operational conditions, a parametric analysis was undertaken by varying the coolant temperature and pitch values. Temperature changes did not significantly affect the results, while modifying the pitch induced a rise in the fraction of deposited energy in lead, highlighting its dependence on the coolant mass. This mass effect was explored in various fuel assembly designs based on the ALFRED benchmark and on the typical assembly model proposed by \textsl{new}cleo, leading to a correlation function for the prediction of coolant heating in realistic assemblies from simple pin cell calculations.

Explore related subjects

physics.ins-det

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Maria Susini, Sacha Barré, Daniele Tomatis, Stefano Argirò. 2024-09-12. Study of energy deposition in the coolant of LFR. https://arxiv.org/abs/2409.08203

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Kinematic Fitting of electromagnetic calorimeter data - an improved method

Kinematic fitting is widely used in particle physics experiments as a powerful tool to improve experimental resolutions, to suppress background and to provide selection criteria for the identification of specific reactions. Kinematic fitting methods, however, typically assume that the fitted quantities follow Gaussian distributions; an assumption which does not always hold. This is particularly true for energy measurements from electromagnetic calorimeters. This issue can largely be overcome by performing a transformation of the non-Gaussian variables into variables which follow a Gaussian distribution. The new adapted kinematic fitting procedure allows to better account for the non-Gaussian nature of the measured calorimeter energies, at the same time improving the accuracy and robustness of the kinematic fit. This leads to improved pull and confidence-level distributions of the kinematic fit as well as improved invariant mass distributions and signal-to-background ratios in the final event sample.

physics.ins-det↗
arXiv2026

Radiation hardness characterization of SiPM sensors for Low Earth Orbit space missions

This work presents a comprehensive radiation hardness characterization of SiPM devices for space-based applications: FBK NUV-HD-MT and NUV-HD-LowCT (1$\times$1, 3$\times$3, and 6$\times$6~mm$^2$) and Hamamatsu S14160 MPPCs with equivalent active areas. Total Ionizing Dose (TID) tests were performed at the ESA/ESTEC Co-60 facility with a level of dose up to 20~krad in silicon, while displacement damage effects were evaluated using 100~MeV protons with a fluence up to $1.12\times10^{11}$~p/cm$^2$ at the Paul Scherrer Institute. Radiation damage in SiPMs manifests through two main mechanisms: ionizing energy loss and non-ionizing energy loss (NIEL), which increases dark current and dark count rate. In this work, breakdown voltage, dark current, and quenching resistance were systematically measured as functions of accumulated dose and fluence. Gain and dark count rates were indirectly measured from the characterized electrical parameters. Both technologies exhibit remarkable stability of most of the functional parameters across all dose levels, while dark current shows predictable increases significantly more pronounced under proton irradiation due to displacement damage. Based on these results, both FBK and Hamamatsu devices are confirmed suitable for Low Earth Orbit (LEO) mission environment.

physics.ins-det↗
arXiv2026

Characterization of immersed SiPM arrays in liquid scintillator between room temperature and $-30\,^{\circ}\mathrm{C}$

Liquid scintillator detectors instrumented with distributed silicon photomultiplier (SiPM) arrays can be used in compact, topology-sensitive, and low-background experiments, but the temperature dependence of SiPMs immersed directly in the scintillation medium has not been widely characterized. We report the operation of a 125-liter linear-alkylbenzene-based liquid scintillator detector read out by 125 SiPM channels immersed in the active volume, over the range from room temperature to $-30\,^{\circ}\mathrm{C}$. The detector response was measured with cosmic-ray muons, including stopping muons followed by their Michel-electron decay. Cooling from $+15\,^{\circ}\mathrm{C}$ to $-30\,^{\circ}\mathrm{C}$ reduced the SiPM dark-count rate by a factor of 13.5, increased the single-photoelectron response by 49.1%, and increased the cosmic-ray muon light yield by 16.7%. The improved photoelectron separation and baseline stability at low temperature enabled a selection of stopping-muon events, from which the effective muon lifetime was measured to be $1959\pm132\,\mathrm{ns}$, consistent with the value expected for a hydrocarbon scintillator once $μ^{-}$ capture on carbon is taken into account.

physics.ins-det↗