Tunable transmissive metasurface based on thin-film lithium niobate

Zetian Chen; Noa Mazurski; Jacob Engelberg; Uriel Levy

Home/Archive/arXiv

arXiv · 2411.04937

Tunable transmissive metasurface based on thin-film lithium niobate

Zetian Chen·Noa Mazurski·Jacob Engelberg·Uriel Levy

View original source ↗Read source document ↗Export metadata ↓

Abstract

Active metasurfaces hold great promise for spatial light modulation, and electro-optic tuning using lithium niobate is particularly attractive due to its high transparency and well-established thin-film platform. In this work, we present a free-space transmissive light modulator based on a seemingly un-patterned thin-film lithium niobate-on-insulator platform, integrated with a transparent conductive oxide meta-grating fabricated through a single lithography process. Guided mode resonance in the near-infrared region is induced with high mode confinement within lithium niobate layer, which directly in contact with the electrodes. A notable resonance shift of 0.38 nm is observed for the fundamental mode under +-10 V bias, while a maximum modulation amplitude of 4.6% is achieved for another higher-order mode. Incident angle is further exploited as another tuning parameter to split and sensitively shift the resonances. These results demonstrate the potential of this design for applications in compact, scalable, and tunable spatial light modulation devices.

Explore related subjects

physics.app-ph physics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Zetian Chen, Noa Mazurski, Jacob Engelberg, Uriel Levy. 2024-11-07. Tunable transmissive metasurface based on thin-film lithium niobate. https://arxiv.org/abs/2411.04937

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph↗

arXiv2026

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph↗

arXiv2026

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph↗