Search arXivSearch

arXiv · 2412.04686

Measuring the ATLAS ITk Pixel Detector Material via Multiple Scattering of Positrons at the CERN PS

Abstract

The ITk is a new silicon tracker for the ATLAS experiment designed to increase detector resolution, readout capacity, and radiation hardness, in preparation for the larger number of simultaneous proton-proton interactions at the High Luminosity LHC. This paper presents the first direct measurement of the material budget of an ATLAS ITk pixel module, performed at a testbeam at the CERN Proton Synchrotron via the multiple scattering of low energy positrons within the module volume. Using a four plane telescope of thin monolithic pixel detectors from the MALTA collaboration, scattering datasets were recorded at a beam energy of $1.2\,\text{GeV}$. Kink angle distributions were extracted from tracks derived with and without information from the ITk pixel module, and were fit to extract the RMS scattering angle, which was converted to a fractional radiation length $x/X_0$. The average $x/X_0$ across the module was measured as $[0.89 \pm 0.01 \text{ (resolution)} \pm 0.01 \text{ (subtraction)} \pm 0.08 \text{ (beam momentum band)}]\%$, which agrees within uncertainties with an estimate of $0.88\%$ derived from material component expectations.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Simon Florian Koch, Brian Moser, Antonín Lindner, Valerio Dao, Ignacio Asensi, Daniela Bortoletto, Marianne Brekkum, Florian Dachs, Hans Ludwig Joos, Milou van Rijnbach, Abhishek Sharma, Ismet Siral, Carlos Solans, Yingjie Wei. 2024-12-06. Measuring the ATLAS ITk Pixel Detector Material via Multiple Scattering of Positrons at the CERN PS. https://doi.org/10.1140/epjc%2Fs10052-025-14092-2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det